« previous next »
Pages: [1]   Go Down

Author Topic: TB Airfoil warning  (Read 9058 times)

0 Members and 1 Guest are viewing this topic.

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« on: April 13, 2005, 01:55:34 PM »
Hi, just a quick ‘warning’ or ‘awareness’ bulletin;  If (like me) you have installed a ‘Power now throttle body airfoil’ along with a smoothbore Air flow ‘Power coupler’ – check (often) that the airfoil hasn’t shifted itself…Found yesterday that mine HAD – almost halfway towards the MAF sensor! So, I’ve probably been running at around ½ air flow for a while (The fact that I can’t say I noticed a drop in performance, AGAIN brings the question of how much DO these ‘performance’ parts REALLY give us in H.P. Gain?

Anyway, that’s my little note – In hindsight I would have bought the airfoil that screws into the face of the TB so it can’t come loose; mine did so only because it relies on the factory concertina type of hose, to hold it in place with the first segment of the hose.

Cheers,
Steve
‘Smacko’
Logged
1985 C4
1980 Custom C3

Offline VET-005

  • Four Barrel
  • ***
  • Posts: 122
TB Airfoil warning
« Reply #1 on: April 13, 2005, 02:06:01 PM »
Every thing i read told me an air foil improves air flow and hence performance. I purchased one and when i had my car dynoed before and after instillation it made no differance, however they probably do make some improvement whilst driving as the air is being forced into the intake but on the dyno NAH!!!!!
Oh put some lock tight on your bolt and that should stop it comming loose.
Logged
Click Images For My Gallery

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« Reply #2 on: April 13, 2005, 02:17:20 PM »
Quote
Originally posted by VET-005
Oh put some lock tight on your bolt and that should stop it comming loose.


Thats the point - THIS type doesn't HAVE a bolt; it's secured in the first fold of the (factory) hose coming back from the MAF.  Dunno if I'd like to use locktight where there's a chance of it being 'consumed'...

Thanks for the prompt reply too :-)
Logged
1985 C4
1980 Custom C3

Offline ozvette

  • Four Barrel
  • ***
  • Posts: 101
TB Airfoil warning
« Reply #3 on: April 26, 2005, 12:47:00 PM »
Quote
Originally posted by VET-005
Every thing i read told me an air foil improves air flow and hence performance.


According to the people who sell them, yes.

Those who use them, no.

They are regarded as  pretty much worthless.

I'd just take it out and then not worry about it coming loose ;)
Logged

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« Reply #4 on: April 26, 2005, 01:03:01 PM »
Well, since I found a dirty big restriction in the form of 2 'ledges' on the bottom of plenum just behind TB; seems we're p*ssing up against a wall as far as getting smooth airflow goes!  Makes one wonder why they'd buy a bigger TB if they looked behind it!;28
Logged
1985 C4
1980 Custom C3

Offline ozvette

  • Four Barrel
  • ***
  • Posts: 101
TB Airfoil warning
« Reply #5 on: April 26, 2005, 01:06:17 PM »
Agreed, there are more airflow restrictions as you go further in, and the long intake runners don't help either.

TB upgrading is no good unless you go a better runner setup IMHO
Logged

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« Reply #6 on: April 26, 2005, 01:57:47 PM »
;41
Logged
1985 C4
1980 Custom C3

Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
TB Airfoil warning
« Reply #7 on: April 26, 2005, 03:41:49 PM »
Quote
Originally posted by ozvette
Agreed, there are more airflow restrictions as you go further in...

TB upgrading is no good unless you go a better runner setup IMHO


I'd agree with that.
Logged
"Life's tough.  It's tougher when you're stupid"

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« Reply #8 on: April 26, 2005, 04:20:48 PM »
:20 ...GM's thinking on this one! :pinki
Logged
1985 C4
1980 Custom C3

Offline Ausrs

  • Four Barrel
  • ***
  • Posts: 165
TB Airfoil warning
« Reply #9 on: May 06, 2005, 08:59:56 PM »
answer to those ledges is a di grinder ,most of those ledges can be smoothed away ,you can also clean up the plenum internally ,radius edges etc to improve airflow .............for what there is till it gets into the runners
Logged

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« Reply #10 on: May 06, 2005, 10:03:15 PM »
Quote
Originally posted by AusRs
answer to those ledges is a di grinder ,most of those ledges can be smoothed away ,you can also clean up the plenum internally ,radius edges etc to improve airflow .............for what there is till it gets into the runners


It's not how to remove them that concerns me; rather, WHY did GM put them there in the first place?:ado
Logged
1985 C4
1980 Custom C3

Offline Ausrs

  • Four Barrel
  • ***
  • Posts: 165
TB Airfoil warning
« Reply #11 on: May 06, 2005, 10:12:45 PM »
Quote
Originally posted by smackc4
Quote
Originally posted by AusRs
answer to those ledges is a di grinder ,most of those ledges can be smoothed away ,you can also clean up the plenum internally ,radius edges etc to improve airflow .............for what there is till it gets into the runners


It's not how to remove them that concerns me; rather, WHY did GM put them there in the first place?:ado

does GM really have to have a reason ??? maybe it would have cost them another 50 cents to get removed after the casting was done and the casting had to be done the way it was LOL
Logged

Offline smackc4

  • Two Barrel
  • **
  • Posts: 24
    • www.australiancorvettes.com
  • Location: Brisbane
  • Mood: Good :-)
TB Airfoil warning
« Reply #12 on: May 06, 2005, 10:47:08 PM »
...Looks like we'll never know the answer to this one...
:}:pinki:}:pinki:}:pinki:spook
Logged
1985 C4
1980 Custom C3

Offline onya

  • Four Barrel
  • ***
  • Posts: 125
TB Airfoil warning
« Reply #13 on: June 12, 2005, 08:37:56 PM »
Whats LOL, seen it plenty of time, but don't know what it means. 25 is a bitch of an age
Logged
Found them, I reckon some RAT hid them.

Offline Thunder Kiss

  • Four Barrel
  • ***
  • Posts: 229
    • http://photobucket.com/albums/v290/ThunderKiss/
TB Airfoil warning
« Reply #14 on: June 12, 2005, 10:58:17 PM »
Quote
Originally posted by onya
Whats LOL, seen it plenty of time, but don't know what it means.

LOL = Laughing out loud

More internet acronyms here.
Logged
Pages: [1]   Go Up
« previous next »