Author Topic: Z06 seats (Read 7635 times)

bfit · « **on:** May 12, 2011, 08:39:57 AM »

HAS any one fitted a set of z06 seats to a C3
Are they to tall to fit
Bfit

Scott · « **Reply #1 on:** May 12, 2011, 12:12:02 PM »

From a C6 or C5?
From what I remember, C5 will fit but may be too high if you use the electric base. If you bolt them to manual rails, they should be fine.

New project - C5 Z06 seats

bfit · « **Reply #2 on:** May 12, 2011, 12:42:44 PM »

Thank You Scott
BFit

RHT · « **Reply #3 on:** May 12, 2011, 05:03:06 PM »

I've fitted C6 seats to my 78.
Initially kept the electric mechanism but this rasied the seats approx 40-50 mm higher than original. Not too good for driving.
Ended up removing the electrics and bolting the original seat tracks to the seats. Sits a little higher than the old seats but they were shot so I think the height they are now would be close to a standard seat height. Kept the the pumps for the lumbar and bolster support though.
Great seats - very comfortable.

Robert

bfit · « **Reply #4 on:** May 12, 2011, 05:50:45 PM »

thanks Robert
I like the C6 seats more so than the C5
I will find some thank you again
do you have a photo of hoe it turned out
I will U2U my email if you do
Bfit

RHT · « **Reply #5 on:** May 15, 2011, 03:41:24 PM »

Took a couple of quick pics today of the C6 seats.

bfit · « **Reply #6 on:** May 16, 2011, 06:11:20 AM »

thank you Robert
Looks like a good fit
Thanks for the help
Bfit