Sterring wheel for C4

[jimbob]

Hi everyone

I have a 1986 convertable with the standard original thin steering wheel.  I want to fit a later model thicker style wheel.  Is it possible to do/ Which ones would be sutiable?

Jimbob

[Vettech]

There are plenty of cars in the club with odd S/wheels, I'm sure if you get it off and take it to a retailer they will fix you up with something you like. You need a little "wheel puller", be carefull of the horn connection, and of course your new S/wheel will need to accomodate the horn, and some after market gear does not do a good job in this area. Good luck.

[sirfixalot]

The problem you will have is to make the tele function work on the column the shaft protrudes a long way thru the wheel . You will have to make a spacer to go  above wheel to mount aftermarket horn button.I used a 90mm stormwater cap & covered in black vinyl on my 78. The other problem I had was I had to redrill wheel to allow boss to be in correct position to cancell blinkers & have wheel in correct position when wheels straight.Not as simple as unbolt one & replace with a new one

[Vettech]

Many moons ago, and I'm not sure if still available, but you could buy a kit of leather wrap, to re-wrap or just go over the existing wheel. These were good on the old THIN ek,eh etc Holden steering wheels, and made the wheel a much thicker, chunkier wheel easier to grip, with less sweatier slip.