Small lathe Job

Started by 76Vett, June 08, 2014, 10:24:21 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

76Vett

June 08, 2014, 10:24:21 AM
Hi All. Does anyone have a metal lathe and can do a small turning job for me OR can recommend a small engineering company, not to far from the shire.
Thanks, Allen
The answer really is 42

sirfixalot

#1
June 08, 2014, 02:09:00 PM
What do you need can probably do it for you

76Vett

#2
June 08, 2014, 02:58:36 PM
Hi Geoff. On the standoffs for my wheel spinners (center caps) the thread is too long so the spinners do not go on all the way, about 2 threads showing, see attached photo. I just need these couple of extra threads turned off, I could hacksaw them of but turning them off would be cleaner.
Thanks.
The answer really is 42

bfit

#3
June 10, 2014, 10:15:11 AM
mate
contact me re machining
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.''
Winston Churchill

76Vett

#4
June 11, 2014, 07:51:42 PM
Thanks, all for the offers I will be in touch.
The answer really is 42
Print
Go Up Pages1
User actions