Camos dodge engine build

[Camo]

Sunday street meets are now  listed on Sydney dragways site.  I've posted details here http://nswcorvettes.com.au/forum/index.php?topic=10357.new#new

[Jethro]

So whats the number that came out for the Baker Boys Engine Dyno in Orange CammO ?

Jethro

[Camo]

Haven't been yet.  Had to get a new centre carby custom made.  The original couldn't keep up. That took about a month to get done in USA.  Just fitted it so hoping to get to orange very shortly.

That's 1570 cfm sitting on top

[MY081]

Thats ok Cam it will make it much easier to calculate mpg you wont need to use double figures LOL

[bfit]

Mate I would not worry about MPG
I would covert to MPB it will be must easier to work  out

M miles
P  per
B  barrel  ( 44 gal )

bfit

[69convert]

You bought a 1570 carby. Yep I bought a 1570 carby. You gonna need a bigger fuel tank.
Stu.

[Jethro]

Haven't been yet.  Had to get a new centre carby custom made.  The original couldn't keep up. That took about a month to get done in USA.  Just fitted it so hoping to get to orange very shortly.

That's 1570 cfm sitting on top

Did you say 1570 cfm sitting on top custom manufactured by Atlas Copco CammO ?

http://youtu.be/IOtFoy-R8Wo?t=13s

[86er]

Cam, You might get dizzy driving in & out of a petrol station

[Camo]

  To all of the above,

Sad parts is that your all most likely correct    bar you Jethro   

I looked down the throat of the middle carby,  with the throttle opened but not enough for the other two to open, and it looked something like this   

http://youtu.be/xGTbQuhhluY


PS went to the drags street meet tonight, 30-07-14, for a look see.  A Canberra plate red c6 ZRI pulling 10.5's, compared to a white Lambo pulling 14's   

A waste of a housing loan if ya ask me 

[Camo]

Finished on the engine jig. The new heart is mounted in it's cradle and on a pallet ready for the trip to the Dyno. 

Now just got to book a date which may be a week or two.  Heading off to Victoria again on Monday 11-08-14 for a week

[bfit]

Cam
I think that chokers you have on the end of the header will slow it down some
Bfit

[Camo]

Ya think 

They'll be coming off for sure

[Jethro]

Been keen to see what Ma Baker boys pull on  the Dyno CammO 

What you hoping for again?

Jethro

[bfit]

Been keen to see what Ma Baker boys pull on  the Dyno CammO 

What you hoping for again?

Jethro

Be Carefull,what your asking for
Bfit

[Camo]

Been keen to see what Ma Baker boys pull on  the Dyno CammO 

What you hoping for again?

Jethro

Be Carefull,what your asking for
Bfit

Some nice numbers. 

If it falls between 600 and 900 I'll be happy, Can't give too much away 

Failing that...... a blond, brunette or red head would suffice 

 

[Camo]

600HP, thought that was ok with the manifold restrictions.  It really wanted to pull/breathe more but I aint having no carbies on a taller manifold sticking out through my hood.

But the torque....... 700 foot pounds (that's all but 950 nm) all happening under 5800rpm. 

I'm going to need more tyres... gearboxs.... diffs.... axles


I'm happy 

[bfit]

700 Ft Lb at ?
bfit

[Camo]

I cant recall, just waiting for the sheet to be emailed to me but it starts to pull really hard from about 2500

[MY081]

Thats cheeting Cam no belt on the power steer pump Lol

[bfit]

Its a dodge you have to make saving where you can
Bfit