My new Vette is too low

[RAY66]

Can anyone send me to some one local Parramatta NSW, or can i do it myself ? she scraps on my driveway . Will going to a 60 seres tyre help ?

[77CVT]

For the rear you can wind the spring bolts up and raise it that way.  for the front - new springs.

[72vet]

Welcome to the forum Ray66, what year is your Corvette?

[vet71y]

going to 60 series tyre wont fix your problem this wil only throw your speedo out .
any suspension specialist can help raise your car. Pedders for instance
I had the same problem with my car solved it by using the neighbours driveway

[72vet]

Originally posted by vet84y

I had the same problem with my car solved it by using the neighbours driveway

;53 ;53

[nifty]

60 series tyres with the SAME width you have now will increase the hight of the tyre...which in effect lifts the car...
the 60 series means its 60 % of the width or the tyre... called aspect ratio..
but correct it will play around with the speedo, and odometre...
but that can be fixed with an adaptor....

[nifty]

but by far the easlist solution is to buy vet84y 's neibors house...and just park it there.:22

[Reklaw]

Hi Ray,
If you can't afford to buy vet84y's neighbours house, it might be worth looking at what's scraping. If it's just the exhaust, perhaps it can be modified - much easier than raising the rest of the vehicle.
Bob

[silver1]

Maybe an easy cheap way,coil spacer or springs
http://www.vbandp.com/Our%20Catalog/source/page_18.htm

[demonx]

Photo's ?

[Jethro]

Photo's ?

Is this what ya wanted Demonx:bannana::bannana::bannana:

[IMG=700x525]http://i261.photobucket.com/albums/ii43/jetrhottracey/IMGP0080.jpg[/IMG]