Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres

C2 small block Borgeson conversion

<< < (2/5) > >>

anychevy:

--- Quote from: craigh on May 12, 2013, 08:55:11 PM ---I modified the ps pump can so the return line goes upward.




--- End quote ---

Good idea, that how it should have come,  :huh: I'll think I might do the same to tidy it up
Cheers

bfit:




Here is same box fitted to C3 BB its tight but you can make it fit with clearance
to headers

These are headman header  heads are Dart with raised exhaust ports

 Bfit

anychevy:

--- Quote from: Bfit on May 13, 2013, 11:00:25 AM ---Here is same box fitted to C3 BB its tight but you can make it fit with clearance
to headers
These are headman header  heads are Dart with raised exhaust ports

--- End quote ---
Yeah, that is tight, check those rag joint bolts, mine were only finger tight.

bfit:

--- Quote from: anychevy on May 13, 2013, 03:03:26 PM ---Yeah, that is tight, check those rag joint bolts, mine were only finger tight.

--- End quote ---

I am not keen on how the rag joint is bolted together
I am looking at making a shoulder bolt  so it and be torqued up and not squash the rubber
the rubber in the joint is not all the flash either
I think an bit of 10/12mm conveyer  belting would do a better job
Bfit

bfit:
Anychevy
How many turns of the steering wheel do you have lock to lock
I have two
Bfit

Navigation

[0] Message Index

[#] Next page

[*] Previous page