Author Topic: Oil Filter (Read 4913 times)

Scott · « **on:** February 17, 2011, 09:40:28 PM »

Does anyone know what oil filter I need for my SBC?

The ryco catalogue doesn't list it, and the staff at supercheap were useless as expected. Mine is still the US filter, so can't use the number from that unfortunately.

RHD.68.l89 · « **Reply #1 on:** February 17, 2011, 11:20:26 PM »

Same as the Holdens with the SBC in them, Z24 from memory. Fits BBC as well

87droptop · « **Reply #2 on:** February 18, 2011, 08:57:27 AM »

bought one last week, just went thru my recycling bin wz40, interchangble with z40, that was from pep's autos

Scott · « **Reply #3 on:** February 18, 2011, 09:10:37 AM »

I did check the early holden listing but there was nothing listed for the 5.7L in the early cars.

A cross check on the Z24 shows it should be the right one... This was supposed to be the easy part :)

77CVT · « **Reply #4 on:** February 18, 2011, 09:12:58 AM »

Scott · « **Reply #5 on:** February 18, 2011, 09:15:29 AM »

A quick check shows the Z40 is the short version of a Z24, just FYI.

72vet · « **Reply #6 on:** February 18, 2011, 09:29:56 AM »

K&N #HP-3002

http://shop.rocketindustries.com.au/products/KNHP-3002

RHD.68.l89 · « **Reply #7 on:** February 18, 2011, 03:18:08 PM »

Back then it would have been 327 or 350 NOT 5.7l