Author Topic: need front springs (Read 3701 times)

th69 · « **on:** April 22, 2010, 09:23:26 PM »

have a 1969 stock 350 roadster in need of new front springs as have a droop on left hand side. are they the same as ht holden

demonx · « **Reply #1 on:** April 23, 2010, 01:19:49 AM »

Call all american autos:

http://www.allamericanautoparts.com.au/

77CVT · « **Reply #2 on:** April 23, 2010, 12:08:01 PM »

For my '77 I got heavy duty lowered HQ springs from Fulcrum suspension - same fit.

Scott · « **Reply #3 on:** April 23, 2010, 03:56:59 PM »

What did the HQ springs do to the ride height? I was pondering new springs for my 73.

77CVT · « **Reply #4 on:** April 23, 2010, 04:58:13 PM »

I wanted it lowered and I think it dropped it at least an inch. I'll have the paperwork somewhere at home so I'll try and remember to have a look for the part No.

demonx · « **Reply #5 on:** April 24, 2010, 12:57:58 AM »

Pedders suspension have HQ V8 lowering springs - I just sold a set.

They lifted the front end of my 76 vette so high it looked like a 4x4.

Reklaw · « **Reply #6 on:** April 24, 2010, 08:04:01 AM »

Pedders also have lowered springs for 'Vettes. They told me they would give a guard lip to bottom of rim distance of 550mm and they were spot on. I just find them a bit hard.

demonx · « **Reply #7 on:** April 24, 2010, 10:39:27 AM »

The more I think about it - may have been cause the front end of my 76 had been screwed with a lot sao it would not have matched with whatever their computer said to use.

mick · « **Reply #8 on:** April 24, 2010, 01:51:28 PM »

http://www.vbandp.com/SearchResult.aspx?CategoryID=370