Author Topic: Look what TRJ has been up to  (Read 69654 times)

0 Members and 2 Guests are viewing this topic.

Offline Shane Finn

  • Four Barrel
  • ***
  • Posts: 203
Look what TRJ has been up to
« Reply #40 on: February 10, 2007, 07:07:10 AM »
Quote
Originally posted by TRJ
...draws hot air out of engine compartment through rear opening.  Any comments??..:evil



Great looking hood. They just look mean.

A comment for you though: the base of the windscreen is a high pressure area because of all the air that collects there from the transition between the relatively flat hood and the angled windscreen. Early C3 BBs used this to direct pressurised air to the air cleaner at speed. It will be unlikely that air will exit the engine bay from this area. It is likely to add even more air to the engine bay which is OK for cooling provided it has other areas to exit.
2001 Z06, Torch Red

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #41 on: February 10, 2007, 07:23:40 AM »
Quote
Originally posted by ZEDohSIX
Quote
Originally posted by TRJ
...draws hot air out of engine compartment through rear opening.  Any comments??..:evil



Great looking hood. They just look mean.
 It will be unlikely that air will exit the engine bay from this area. It is likely to add even more air to the engine bay which is OK for cooling provided it has other areas to exit.


Great point, ZEDohSIX, thanks a lot.....;42

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #42 on: February 10, 2007, 11:48:00 AM »
Latest update: 10-02-2007

(3) pics of the LPE 427 CID motor going together...:spook




Offline Cameron 77C3

  • Supercharged
  • ******
  • Posts: 2554
  • I use to live here
    • http://xtremecarzone.com.au/
Look what TRJ has been up to
« Reply #43 on: February 11, 2007, 12:15:52 AM »
Siamese bores.

I was surprised to see on a single row timing chain rather than a twin.  

Looking good.  Bet ya can't wait?
To see my picture galleryCLICK ME
 
Never underestimate PRISCILLA queen of the vette's
www.xcz.com.au

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #44 on: February 11, 2007, 03:41:48 AM »
Quote
Originally posted by Cameron 77C3

Looking good.  Bet ya can't wait?


In about (2) more weeks, I hope...The Philidelphia Groundhog
predicts an early Spring...I hope he's right..:mmm
Do you have a "Groundhog Day" in Oz?


Offline Cameron 77C3

  • Supercharged
  • ******
  • Posts: 2554
  • I use to live here
    • http://xtremecarzone.com.au/
Look what TRJ has been up to
« Reply #45 on: February 11, 2007, 11:05:16 AM »
Quote
Originally posted by TRJ
In about (2) more weeks, I hope...The Philidelphia Groundhog
predicts an early Spring...I hope he's right..:mmm
Do you have a "Groundhog Day" in Oz?


Nope and snow is not in abundance here.
To see my picture galleryCLICK ME
 
Never underestimate PRISCILLA queen of the vette's
www.xcz.com.au

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #46 on: February 11, 2007, 11:17:49 AM »
Quote
Originally posted by Cameron 77C3

Nope and snow is not in abundance here.


Well, I know what you mean by "snow"...:flower



Offline Cameron 77C3

  • Supercharged
  • ******
  • Posts: 2554
  • I use to live here
    • http://xtremecarzone.com.au/
Look what TRJ has been up to
« Reply #47 on: February 11, 2007, 03:47:32 PM »
Very pretty.  Although I would imagine for you guys that having it every year, it becomes a pain.
To see my picture galleryCLICK ME
 
Never underestimate PRISCILLA queen of the vette's
www.xcz.com.au

Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
Look what TRJ has been up to
« Reply #48 on: February 12, 2007, 02:30:41 PM »
Quote
Originally posted by Cameron 77C3
Very pretty.  Although I would imagine for you guys that having it every year, it becomes a pain.


It gives people an excuse to put their car on stands and undertake major modification projects. :v

Maybe I'll move... ;41
"Life's tough.  It's tougher when you're stupid"

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #49 on: February 12, 2007, 02:41:10 PM »
Quote
Originally posted by Vette Obsessed

It gives people an excuse to put their car on stands and undertake major modification projects. :v


GUILTY!!...;54....;53


Offline jolinari

  • Supercharged
  • ******
  • Posts: 1540
Look what TRJ has been up to
« Reply #50 on: February 12, 2007, 09:18:58 PM »
hey TRJ...check this out C5 Lingenfelter Supercharged Corvette Z06...sorry not trying to highjack ur thread but gee they sound so mean mate!!!


Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
Look what TRJ has been up to
« Reply #51 on: February 12, 2007, 09:26:00 PM »
Quote
Originally posted by jolinari
hey TRJ...check this out C5 Lingenfelter Supercharged Corvette Z06...sorry not trying to highjack ur thread but gee they sound so mean mate!!!



The noise you hear there is why I'm always raving on about magnusson superchargers.
"Life's tough.  It's tougher when you're stupid"

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #52 on: February 13, 2007, 12:40:20 AM »
Quote
Originally posted by jolinari
hey TRJ...check this out C5 Lingenfelter Supercharged Corvette Z06...sorry not trying to highjack ur thread but gee they sound so mean mate!!!


You bet jo, the "Maggie" SC and Lingenfelter magic make for a beast of a Corvette! I originally planned on just having them put a Maggie on my stock 2007 C6, but later decided to go with the 427 NA package and forged motor and upgraded trans, & diff.  A little further down the line, I'll probably put a Maggie on top of my forged 427, then I should have quite a car. Maybe then I won't have to worry too much about scattering parts down the straights....:ado

Here's a couple of short Video's of Maggied C6's...;eek

Video: http://s169.photobucket.com/albums/u216/TRJ_photo/?action=view&current=C6CorvettewithSupercharger.flv

Video: http://s169.photobucket.com/albums/u216/TRJ_photo/?action=view&current=C6flyingbyat160mph.flv

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #53 on: February 13, 2007, 12:43:59 AM »
Quote
Originally posted by Vette Obsessed

The noise you hear there is why I'm always raving on about magnusson superchargers.


I feel the same way V.O....very, very addicting!...:spook

Offline Cameron 77C3

  • Supercharged
  • ******
  • Posts: 2554
  • I use to live here
    • http://xtremecarzone.com.au/
Look what TRJ has been up to
« Reply #54 on: February 13, 2007, 05:23:54 PM »
Did some one say the word supercharger? ;46


Bugattis, superchargers, high powered machines, throbbing V8's and top music.  I think I'm feeling a little frisky. ;)
To see my picture galleryCLICK ME
 
Never underestimate PRISCILLA queen of the vette's
www.xcz.com.au

Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
Look what TRJ has been up to
« Reply #55 on: February 13, 2007, 06:46:03 PM »
Quote
Originally posted by TRJ
Quote
Originally posted by Vette Obsessed

The noise you hear there is why I'm always raving on about magnusson superchargers.


I feel the same way V.O....very, very addicting!...:spook


It is, and at the risk of going off track I think you've gone the better way with the 427 - more power without the issues that go with forced induction like heat and packaging factors.

Not that I'd object to a supercharged 427...

My friend with the maggied 99 C5 doesn't hold back from giving that some stick - and he says his 07 Z06 is almost too fast and doesn't need modding.  Not a direct comparison with an LS2 but I think the conclusions would be similar. ;42
"Life's tough.  It's tougher when you're stupid"

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #56 on: February 14, 2007, 03:41:44 AM »
Quote
Originally posted by Vette Obsessed

Not that I'd object to a supercharged 427...


Here's one going together....:spook


Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
Look what TRJ has been up to
« Reply #57 on: February 14, 2007, 04:17:51 PM »
Quote
Originally posted by TRJ
Quote
Originally posted by Vette Obsessed

Not that I'd object to a supercharged 427...


Here's one going together....:spook



So it can be done on an LS7?
"Life's tough.  It's tougher when you're stupid"

Offline TRJ

  • Four Barrel
  • ***
  • Posts: 226
Look what TRJ has been up to
« Reply #58 on: February 14, 2007, 04:47:28 PM »
Quote
Originally posted by Vette Obsessed
Quote
Originally posted by TRJ
Quote
Originally posted by Vette Obsessed

Not that I'd object to a supercharged 427...


Here's one going together....:spook



So it can be done on an LS7?


YES! The 427 CID package uses a Z06 LS7 Block. The Heads are your LS2 Heads which are CNC ported and polished to match the LS7 Block. The LS7 Block is a small block.  The Maggie fits on just fine. Should put you above 700 flywheel HP....;eek....(Also may be done as a Twin Turbo)...;eek

LPE Z06 LS7 Block


Offline Vette Obsessed

  • Supercharged
  • ******
  • Posts: 1310
    • http://www.nswcorvettes.com.au
Look what TRJ has been up to
« Reply #59 on: February 14, 2007, 05:07:38 PM »
Quote
Originally posted by TRJ
YES! The 427 CID package uses a Z06 LS7 Block. The Heads are your LS2 Heads which are CNC ported and polished to match the LS7 Block. The LS7 Block is a small block.  The Maggie fits on just fine. Should put you above 700 flywheel HP....;eek....(Also may be done as a Twin Turbo)...;eek



:v:v:v

I've been wondering if that could be done for some time...

That would have to be my dream setup. :spook

As I'm sure you know, LPE does a twin turbo for the LS7 which they rate at 800hp.

I'd be happy with the maggy - I don't ask for much.
"Life's tough.  It's tougher when you're stupid"