Author Topic: CONVERT MANUAL TO AUTO T700 (Read 6619 times)

L71 · « **on:** December 18, 2006, 07:26:03 PM »

Has anyone out there put a t700 into a c3 , I’m sure there’s a kit out there somewhere seen it in a heap of mags but forgot where & couldn’t be bothered going through hundreds of Vette mags. The fitting up of the box isn’t the issue its all the rest of it, want to ditch the Muncie & go drag shift , also making the cross member removable for ease of working on , John 0407 012359

77CVT · « **Reply #1 on:** December 19, 2006, 02:27:40 PM »

Brutus will have the info - I think he may even have an R200(?) box that will do the job too!

Send him a u2u.

ettev87 · « **Reply #2 on:** January 24, 2007, 09:02:58 PM »

I have a shifter kit from Ecklers in the States that is surplus to my needs.

Brand new, make an offer.

I should add;
Besides the "shift conversion" kit from Ecklers which has the detent plate, cable hardware and indicator plate. I have the shift lever and all associated brackets etc.

I am changing my auto to manual.

Also available is new B&M auto drive plate, new B&M hi-stall converter and original 3 speed trans with B&M shift lit installed.

All of the above never installed.

87Z51 · « **Reply #3 on:** January 31, 2007, 10:06:56 PM »

Read

http://www.nswcorvettes.com.au/forum/viewthread.php?tid=286

Any half decent welder could mod the existing trans mount to suit.
Get driveshaft shorterned ,
Late 4 spd ,T350, T700, yokes the same.

sirfixalot · « **Reply #4 on:** February 21, 2007, 09:05:36 PM »

I am intending to do my car at the end of the month have a couple of articles with gearbox lenght tail shaft yoke etc
Geoff 0417473492

Author Topic: CONVERT MANUAL TO AUTO T700 (Read 6619 times)

ettev87