« previous next »
Pages: [1]   Go Down

Author Topic: Door locks  (Read 9632 times)

0 Members and 1 Guest are viewing this topic.

Offline reserved

  • Four Barrel
  • ***
  • Posts: 162
Door locks
« on: May 14, 2006, 01:54:05 AM »
;wtf;49

There is nothing to read so I thought I would post my day.
Decided to have a go at fixing the sticking door lock. Got the locking mechanism ready to come out OK, but then spent about 1.5 hours trying to get the locking mechanism out through the hole just near the lock.
;43;mmm;30;43
Noticed some screws at the bottom of the door, so simple (not me) after that, now all I have to do is put it together again.
Have washes the lock in kero, Should I grease it befor I reinstall it or will the grease make its operation sticky.
;52
Logged

Offline jolinari

  • Supercharged
  • ******
  • Posts: 1540
Door locks
« Reply #1 on: May 14, 2006, 02:40:59 AM »
Quote
Originally posted by reserved
;wtf;49

There is nothing to read so I thought I would post my day.
Decided to have a go at fixing the sticking door lock. Got the locking mechanism ready to come out OK, but then spent about 1.5 hours trying to get the locking mechanism out through the hole just near the lock.
;43;mmm;30;43
Noticed some screws at the bottom of the door, so simple (not me) after that, now all I have to do is put it together again.
Have washes the lock in kero, Should I grease it befor I reinstall it or will the grease make its operation sticky.
;52





from memory with 69 vette....we sprayed it with some WD-40
Logged

Offline Cameron 77C3

  • Supercharged
  • ******
  • Posts: 2554
  • I use to live here
    • http://xtremecarzone.com.au/
Door locks
« Reply #2 on: May 21, 2006, 07:04:19 PM »
WD40 is mostly Kero and will loose it's lubricating effects with time.

I would grease it.  I did with mine.  There is a white grease you can use and buy from Holden Spares but for the life of me I can't remember it's name.
Logged
To see my picture galleryCLICK ME
 
Never underestimate PRISCILLA queen of the vette's
www.xcz.com.au

Offline Shane Finn

  • Four Barrel
  • ***
  • Posts: 203
Door locks
« Reply #3 on: May 21, 2006, 08:40:21 PM »
Lithium grease? - often comes in a spray pack
Logged
2001 Z06, Torch Red

Offline Cameron 77C3

  • Supercharged
  • ******
  • Posts: 2554
  • I use to live here
    • http://xtremecarzone.com.au/
Door locks
« Reply #4 on: May 21, 2006, 11:02:34 PM »
Thats the stuff.
Logged
To see my picture galleryCLICK ME
 
Never underestimate PRISCILLA queen of the vette's
www.xcz.com.au

Offline jolinari

  • Supercharged
  • ******
  • Posts: 1540
Door locks
« Reply #5 on: May 22, 2006, 02:31:12 PM »
Quote
Originally posted by Cameron 77C3
WD40 is mostly Kero and will loose it's lubricating effects with time.

I would grease it.  I did with mine.  There is a white grease you can use and buy from Holden Spares but for the life of me I can't remember it's name.



;51 my door lock is getting bit tough now...will definetly have to put some grease
Logged

Offline 69VETTE

  • Supercharged
  • ******
  • Posts: 1139
  • When a C3 is not Enough! - Try A C4
  • Location: Sydney
  • Mood: Get Jiggy Wit It
Door locks
« Reply #6 on: June 07, 2006, 08:01:31 AM »
Joe,

I think from my recolection, we may have put WD40 in the locking mechanism at the time because thats all we had.. and it was sticking anyway....

Easily fixed..
Logged
Live life to the fullest...drive a Corvette
Pages: [1]   Go Up
« previous next »