Author Topic: C4 Oil Cooler / Filter  (Read 112 times)

0 Members and 1 Guest are viewing this topic.

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1197
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
C4 Oil Cooler / Filter
« on: February 18, 2020, 05:52:18 PM »
On C4's equiped with the KC4 Engine Oil Cooler look out for the fitting on the bottom of the block becoming corroded and blocked.

It is 1/4NPT to Barb fitting.
Whilst 1/4NPT fittings are avail, it would appear that this particular fitting was dreampt up by GM.

The catch 22 is that after buying several bits, the barbs all seem Way Toooo small and slop around in the hose.

The hoses came from Corvette Central - specially molded for the purpose. But whilst the fitting is shown on many diagramms, it it not listed as a purchaseable part.

Been thru all my Odds and Sods, and thru Rocket Ind cattle dogs.

Saw one part on Ebay - ex US at ~ $12US plus $42US postage !?!?!?!?!?LLnvv ..

I wonder who may have a Lathe ummmmmmmmmm.?......



   
Vettech.

Offline Bfit

  • Don't talk of dust and roses
  • Supercharged
  • ******
  • Posts: 2731
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: C4 Oil Cooler / Filter
« Reply #1 on: February 18, 2020, 07:48:08 PM »
Get me a photo. And some accurate dimensions .
Bfit
Freedom's just another word for nothin' left to lose
George Orwell 1984

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 578
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
Re: C4 Oil Cooler / Filter
« Reply #2 on: February 18, 2020, 10:59:22 PM »
I removed mine & drilled out rust & crap & re installed also had to replace the hose tails on oil cooler with some brass ones I soft soldered them into cooler