Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres
Bled new Wilwood brakes but still spongy pedal
jimandemma:
Yes, replaced the Master Cylinder with a compatible Wilwood one. Calipers are in the correct orientation.
jimandemma:
77CVT, clamped the lines with the old master cylinder. Got a new one, same problem, ARGH!!
BOSCHVETTE:
Try this; bleed brakes. clamp all 4 brake lines. if pedal is rock hard master is in working order. if not master is problem. if master is ok take clamp off 1 caliper at a time testing each time till you find when it goes soft. your master can also be wrong size to piston size of caliper.
bfit:
Paul
I think he has don't all that,
something is not working correctly
and may be its the new flexible brake hoses.
Jim can you make up some blanks to block of the lines at the chassis brackets
and see if you can get a full pedal
Bfit
BOSCHVETTE:
Thats cool but at what point then did the pedal go soft?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version