Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres
Bled new Wilwood brakes but still spongy pedal
jimandemma:
I know. I'll re-adjust Tuesday when I have digital verniers to get absolute correct measurements
sirfixalot:
Perhaps check for a buckled pad which isn't sitting flat against disk
jimandemma:
Pads are good and parallel to the discs. Clamped the lines to the calipers and had the same problem which discounted them from the equation
BOSCHVETTE:
Have you replaced the master cylinder its the only thing it could be. The other thing i have seen is the caliper put on upside down putting the bleed nipple facing down............ I have to ask the dumb questions IT is facing up?
77CVT:
"Clamped the lines to the calipers and had the same problem which discounted them from the equation "
Then it is the master cylinder.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version