Author Topic: Searching for LH Door, Sill plate and Rocker panel  (Read 5677 times)

0 Members and 1 Guest are viewing this topic.

Offline Matt G

  • Four Barrel
  • ***
  • Posts: 110
  • Location: The Hills District, NSW
  • Car: 1970 Coupe 350 manual.
Searching for LH Door, Sill plate and Rocker panel
« on: October 15, 2016, 03:43:03 PM »
Does anyone have a 1970 coupe suitable, second hand:
Sill Plate
LH Rocker panel
LH Door (without inner skin, or hardware).  If you have it with glass and in Bridgehampton Blue it's a bonus!
WIll pick up at Show & Shine if available and reasonably priced

Offline rosco

  • Four Barrel
  • ***
  • Posts: 199
  • Location: Hills District
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #1 on: October 15, 2016, 05:50:21 PM »
Matt have a set of second hand sill plates you are welcome to.
Can have them at the show tomorrow if you wish.

Rosco

Offline Matt G

  • Four Barrel
  • ***
  • Posts: 110
  • Location: The Hills District, NSW
  • Car: 1970 Coupe 350 manual.
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #2 on: October 15, 2016, 08:15:00 PM »
Thanks Rosco, that would be great. I can only swing by the show between about 9:30 and 10:30am. Is  that okay? What would you like for them?

Hey guys, on further inspection, please add a LH side Electric window motor and the bottom horizontal window mechanism rail to the list of needs.

Offline rosco

  • Four Barrel
  • ***
  • Posts: 199
  • Location: Hills District
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #3 on: October 15, 2016, 09:06:26 PM »
Will be there from 9 so just come up and see me, don't want anything for them all good.
Did we have a little incident did we.

Rosco

Offline Matt G

  • Four Barrel
  • ***
  • Posts: 110
  • Location: The Hills District, NSW
  • Car: 1970 Coupe 350 manual.
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #4 on: October 15, 2016, 10:18:04 PM »
Maybe a little one... is it obvious 🤕
Sometimes (generally afterwards) I wish I was a little more mature.

Offline Matt G

  • Four Barrel
  • ***
  • Posts: 110
  • Location: The Hills District, NSW
  • Car: 1970 Coupe 350 manual.
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #5 on: October 20, 2016, 09:59:28 PM »
Does anyone have plans to bring out some parts, that I can tack on to, or does anyone have a great contact for importing parts.  I found a door via an old buddy in Ohio (a little rough on the inside, but fixable).  I got glass, rollers, power window motor, regulator, etc, but the shipping is going to be the killer. 
I'd appreciate any shared info.

Also, still open to a local door, glass, LH power window motor, etc  if anyone has one?

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #6 on: October 20, 2016, 10:21:53 PM »
Have you tried
http://www.vetteconnection.com.au/
Melbourne, he may just have what you need.
You can fit doors  upto 77 on a 70,
73 /77 have intrusion bars , that may be an advantage or not.
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Matt G

  • Four Barrel
  • ***
  • Posts: 110
  • Location: The Hills District, NSW
  • Car: 1970 Coupe 350 manual.
Re: Searching for LH Door, Sill plate and Rocker panel
« Reply #7 on: October 22, 2016, 08:15:50 AM »
Thanks Bfit.  I've sent them a request.
I'm surprised that we don't have suppliers regularly logged on and offering their parts or assistance when we post on the "parts wanted" forum.  Maybe they're all too busy to want more business?  Bazaar 😳