RH external door handle - 73 vette

[Scott]

My door wouldn't open the other night and I thought something had jammed or popped off. 

Turns out the door handle broke, so I need another one.

Ebay has them ranging from $25 to $90 from the US.  Anyone have any experience as to which are good/bad/ugly?

Alternately, I'd be happy with a 2nd hand one.  Mine was pitted and not perfect, so as long as it's functional I'll be happy with it.

[wabco40]

Hi Scott,

I would spent the extra money and go for the Trim Parts handle instead of the cheaper Chinese copy.

http://www.trimparts.com/parts/index/b2Zmc2V0PTU%3D/

[Vettech]

The finger plate that moves has an arm cast into it, and either snaps fully off or breaks thru the hole that carries the lever that goes down into the doors guts and connects to the locking mech. Because of the amount of force and leverage applied esp if the mech is stiff etc then repair is not easy if not impossible.

[Scott]

The finger plate that moves has an arm cast into it, and either snaps fully off or breaks thru the hole that carries the lever that goes down into the doors guts and connects to the locking mech. Because of the amount of force and leverage applied esp if the mech is stiff etc then repair is not easy if not impossible.

Yep, it broke through the hole.  Snapped the bottom off.  I'm wondering if it was adjusted wrong, allowing more force to be applied once the rod bottoms out the door latch.