A brief look at a day changing A C5 Clutch

Cameron 77C3 · June 27, 2007, 10:51:30 AM

[align=justify]

G'day gang. Brian our Treasurer has a C5. Welll the clutch spat the dummy so it was time to rip it out. I offered the use of my hoist and a hand full of the boys chipped in to help.

There was Gary L, Steve T, Bill A, Andy L , myself and of course Brian.

Talk about a team effort.

Being a trans axle means that the gearbox is in the back with the diff and suspension. Yes that means that the whole back end has to come out to change out the clutch. The following are a few shots of the event.

It went quite well. Gary and Steve were the brains of the operation and on the workshop manual while the rest of us grunted for them and put in our two cents worth here and there. It was a bit of a challenge but I have to say after doing one I would not hesitate to help do another now we know some of the tricks.

Damm fun and interesting.

[/align]

BrianVette · June 27, 2007, 01:21:44 PM

While I was the recipient of all this help cannot thank the guys enough it shows the sort of clubmanship that exists within our club . A really big job which helped me learn a lot about my car

Cameron 77C3 · June 27, 2007, 05:10:05 PM

QuoteOriginally posted by BrianVette
.................. A really big job which helped me learn a lot about my car

Yeah, so if I ever see you dropping the clutch and smoking them up look out. ;53 :22

BrianVette · June 27, 2007, 07:24:36 PM

But I thought you said that you were expecting that of me ;53

Cameron 77C3 · June 28, 2007, 12:53:01 PM

Remember we still have the heads and cam work to do. Wander what happens when the cam gets put in backwards? :grr ;39

BrianVette · June 28, 2007, 01:33:41 PM

But put backwards into WHAT ;29

Vette Obsessed · June 28, 2007, 02:49:04 PM

QuoteOriginally posted by BrianVette
But put backwards into WHAT ;29

;43 ;43 ;43 ;53

Cameron 77C3 · June 28, 2007, 03:15:12 PM

OUCH! ;39

smokem · June 28, 2007, 07:45:59 PM

I don't mind if you tear it up !

Vette Obsessed · June 28, 2007, 07:57:34 PM

Brian, didn't you tell Cam about the line lock we are installing when the cam and heads go on?

Cameron 77C3 · June 28, 2007, 07:57:53 PM

Gaz I have the old slave cylinder. Do you still want it? If so I'll bring it and those spanners on the Go Kart Day

69VETTE · June 29, 2007, 07:47:24 AM

Great Pics Cam,

Now that you guys are experts, you can also do mine when and if i get a C5;43

Oh,... and its good to see your back on the road Brian.

M;36

BrianVette · June 29, 2007, 10:27:44 AM

Its better than drugs :22;28;):);46;46;41

Cameron 77C3 · June 29, 2007, 04:33:59 PM

QuoteOriginally posted by BrianVette
Its better than drugs

And you know this how???;39