SIDE PILLARS INSTALATION

Started by jolinari, July 19, 2006, 11:44:50 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.


smokem

Think you then lift up and out as bottom is forced into top of dash where it locates by design.
[align=center]
STOP ACTING STUPID!
WE'VE GOT POLITICIANS TO DO THAT
[/i]
[/align]

jolinari

QuoteOriginally posted by smokem
Think you then lift up and out as bottom is forced into top of dash where it locates by design.

Tried to remove it by force but would come out...and thats y i posted it here whether there is any special trick

smokem

No fancy method, maybe there is some sealer behind so just move around .
[align=center]
STOP ACTING STUPID!
WE'VE GOT POLITICIANS TO DO THAT
[/i]
[/align]

jolinari

QuoteOriginally posted by smokem
No fancy method, maybe there is some sealer behind so just move around .

will give it a go tomorrow...;48

MADLT1


MADLT1

hello joe,hope that helps,they should just come off with a little force,once the screws up top are out the side pillar needs to be pulled away from the frame by about a inch,thats were 3and 4 are together,its like velcro,then as you can see there is a fastener at the bottom,slide the pillar up and out with a bit of a wiggle,you will get there,good luck...........:24

jolinari

Great info Mad! thanks Heaps ur the man!

MADLT1