Author Topic: PCV stuff  (Read 11032 times)

0 Members and 2 Guests are viewing this topic.

Offline Adam

  • Four Barrel
  • ***
  • Posts: 203
    • http://homepages.ihug.com.au/~turon/photo/index.htm
PCV stuff
« on: November 02, 2002, 03:29:11 PM »
What does the PCV system look like on your vettes? My air filter and rocker covers are not original and I have a tube running straight from myPCV valve into my carby, now on most cars iv'e seen (including my Niki) theres is like a metal shavings filter between the rocker cover and carby that traps airborne oil particles which collects and eventually drips back down into the rocker cover.

I think I need a filter like this to minimise my carbon diposit problem on the plugs. One thats slots into where the PCV valve is now. My question is do I really need that valve? Why is it there? I hav'nt seen one on other cars... unless im not looking properly.

Adam
1980 LG4 stock 305 running LPG.


I'm a highway staaaaaarrrr...

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
PCV stuff
« Reply #1 on: November 02, 2002, 04:26:57 PM »
Adam...The general consus is that it's better to leave the PCV valve in place. The inlet vacuum draws crankcase vapours from the guts of the motor through the PCV valve which prevents any build up of these sometimes volitile gases. For this system to work at peak efficiency it's also necessary for the opposite rocker cover breather to be clean and free of build up to allow a flow of clean air through the motor and thus preventing a possible vacuum inside the engine.
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes


Offline Adam

  • Four Barrel
  • ***
  • Posts: 203
    • http://homepages.ihug.com.au/~turon/photo/index.htm
PCV stuff
« Reply #2 on: November 02, 2002, 05:53:51 PM »
Yeh, I dont want to get rid of the PCV system, just filter those gases that are going into my carby. It's an old engine and its likely those gasses are  chock full of bad stuff...

Adam
1980 LG4 stock 305 running LPG.


I'm a highway staaaaaarrrr...

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
PCV stuff
« Reply #3 on: November 04, 2002, 09:55:17 AM »
You could always build one of these....





Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au

Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
PCV stuff
« Reply #5 on: November 04, 2002, 09:58:24 AM »
Geeze....why can't we edit posts????

http://www.autospeed.com/A_0338/page1.html

After all that it probably wasn't worth it anyway!  :b2

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
PCV stuff
« Reply #6 on: November 04, 2002, 10:42:23 AM »
Chris...it's a built in factor to help you build your post count. ;laugh

So many people from various forums live to see their post count reach certain figures. They have no life.:b2

Now if I just send 26.73% more posts per day for ..........;ay
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes


Offline 77CVT

  • Fuel Injected
  • *****
  • Posts: 883
    • www.autobabes.com.au
PCV stuff
« Reply #7 on: November 04, 2002, 11:41:43 AM »
Free post! ;laugh;laugh

Offline Brutus

  • Fuel Injected
  • *****
  • Posts: 730
    • http://temp.corvetteforum.net/c3/brutus
PCV stuff
« Reply #8 on: November 04, 2002, 01:05:59 PM »
Opportunist!:22
BOB

THE C3 SHARK TANK - The best, first, and oldest site for owners of 1968 to 1982 Corvettes