Procedure of removing shims from upper control arms

[jimandemma]

Hi all,
         after lowering the front of my 75, I have around 2 1/2 degrees negative camber both sides. On the upper control arms, there are two 1/8" shims front and back on both sides. To obtain close to positive camber again, can I remove these shims by loosening the nuts with weight on wheels, or does the car need to be jacked and wheels off?

Thanks in Advance,
                              Jim

[bfit]

Loosen the nuts and pull the shims out, do the nuts bach up tight

do you have a caster gauge.
Camber you can do with a level.

[jimandemma]

No caster gauge Bfit. Will probably take it to a wheel align shop. Caster is currently 3 1/2 degrees both sides.

[bfit]

What do you want to achieve.

Bfit

[jimandemma]

yeah, happy with that caster, just want to get a bit more positive camber to bring the top of the tyres outboard. So I can do shims with weight on wheels?

[jimandemma]

All done this morning, happy with the result. Thanks for the help, Jim