« previous next »
Pages: 1 2 [3]   Go Down

Author Topic: Engine continually cuts out - 75 C3 350  (Read 19378 times)

0 Members and 1 Guest are viewing this topic.

Offline jimandemma

  • Four Barrel
  • ***
  • Posts: 140
  • I'm new here
  • Location: Newcastle
Re: Engine continually cuts out - 75 C3 350
« Reply #40 on: April 04, 2017, 09:56:36 AM »
Oily carb adjustment screw LHS
Logged

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 701
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
Re: Engine continually cuts out - 75 C3 350
« Reply #41 on: April 04, 2017, 10:08:09 PM »
The relay in  question is high speed fan relay for ac. Dissy should have a pink wire which has 12v in run & start position  & also white wire which is output from dissy to tacho. These should be two individual plugs into dissy for these wires.  There should be no wire going to relay from dissy. Remove the pink wire & run a wire with spade connector from dissy  terminal to battery + on alternator then try to start engine
Logged

Offline jimandemma

  • Four Barrel
  • ***
  • Posts: 140
  • I'm new here
  • Location: Newcastle
Re: Engine continually cuts out - 75 C3 350
« Reply #42 on: April 04, 2017, 10:28:50 PM »
yeah, was wrong on relay. Will try the wire to alternator in the morning.
Logged

Offline jimandemma

  • Four Barrel
  • ***
  • Posts: 140
  • I'm new here
  • Location: Newcastle
Re: Engine continually cuts out - 75 C3 350
« Reply #43 on: April 05, 2017, 06:06:53 PM »
All fixed. Ended up being the module in the distributor. Thanks guys.

Jim
Logged

Offline sirfixalot

  • Fuel Injected
  • *****
  • Posts: 701
  • Committee Member & Tech Adviser C3-C4
  • Location: Gods Country Sutherland S
Re: Engine continually cuts out - 75 C3 350
« Reply #44 on: April 05, 2017, 09:36:49 PM »
I hope you bought a half decent one I put a chinese one in my 79 gave up on me going down the coast, was doing 100k on freeway then nothing. Did you use heat sink paste under module?
Logged

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1614
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: Engine continually cuts out - 75 C3 350
« Reply #45 on: April 05, 2017, 09:50:21 PM »
Yes Sirfixalot, good advise, you need that heat sink paste.
Logged
🖕 Vettech.

Offline jimandemma

  • Four Barrel
  • ***
  • Posts: 140
  • I'm new here
  • Location: Newcastle
Re: Engine continually cuts out - 75 C3 350
« Reply #46 on: April 06, 2017, 08:25:01 AM »
Bought a Proflow distributor from VPW so nicked all the bits off that. Yes, plenty of heat sink paste under the module.
Logged

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1614
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: Engine continually cuts out - 75 C3 350
« Reply #47 on: April 06, 2017, 12:38:26 PM »
You are troubling me now. Why buy and xfer ALL parts if you had the culpit module.
Why not swap over complete Dizzies or just the module.

A new complete dizzy is NEW, has no bearing (bush) wear, or pinion wear etc good for twenty years.

Anyway - happy cruising hope to see you around.
Logged
🖕 Vettech.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Engine continually cuts out - 75 C3 350
« Reply #48 on: April 06, 2017, 05:36:51 PM »
Changing out a distributer , can be a bit of a chalange for someone who has not done one before.
Bfit
Logged
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Vettech

  • Supercharged
  • ******
  • Posts: 1614
  • The rocket sled in Steel Blue.
  • Location: Cecil Hills. N S W.
  • Mood: Electrofied.
  • Car: C3 78 + C4 87 + C4 90
Re: Engine continually cuts out - 75 C3 350
« Reply #49 on: April 06, 2017, 08:18:46 PM »
Yes - but help is only a call away.
Logged
🖕 Vettech.

Offline jimandemma

  • Four Barrel
  • ***
  • Posts: 140
  • I'm new here
  • Location: Newcastle
Re: Engine continually cuts out - 75 C3 350
« Reply #50 on: April 06, 2017, 08:38:52 PM »
Was going to install the new dizzy, but due to lack of experience, wanted it to be the last thing I'd do. Honestly thought it was the fuel pump and changed that, then maybe the leads or coil so changed them, then was told by an associate he had the same problem with the dizzy module so changed that and all fixed. Will eventually change the distributor when I get a hand down the track, but at least the car is back to normal and driveable now.
Logged

Offline metalhead

  • Four Barrel
  • ***
  • Posts: 198
  • Black is best...
  • Location: Newcastle, NSW
Re: Engine continually cuts out - 75 C3 350
« Reply #51 on: April 06, 2017, 09:17:26 PM »
I'm at Clarence Town, I can probably help with that if you like, just send us a pm.
Logged
Pages: 1 2 [3]   Go Up
« previous next »