Author Topic: 79 repairs? (Read 22661 times)

Lefty · « **Reply #20 on:** April 07, 2014, 05:19:34 AM »

Sirfixalot,
Car is in holding yard until we agree on who will fix it.

I'm thinking there may be a few parts to getting this going again, and this may be done by different repairers,
1. Subframe check and suspension repairs,
2. Motor repairs,
3. Body work and replace damaged wheels,

Manny thanks for the offer regarding parts, I'll let the repairer know about the parts and discuss how they will source. First thing I will need to get the assessor to look at it and discuss repairer options?

Cheers, lefty

69VETTE · « **Reply #21 on:** April 07, 2014, 09:28:46 AM »

Ouch.. that looks painful Lefty.. Its good to hear you came out unscathed.. and is all well ...

Lefty · « **Reply #22 on:** May 16, 2014, 06:05:05 AM »

Hi,
Whilst repairs continue there may be an oportunity to replace the exhaust. The current system sounds sweet, but is damaged.
The currnet system ends up in one pipe travelling under the RHS of the car. I have noticed there are two cutouts in the cross member and was wondering if a twin pipe system was better?
Will it breathe better?
Does the single pipe system provide something that may be lost with a twin system?
Will it sound as good?

May thanks in advance for your response?
Cheers
Lefty

Jethro · « **Reply #23 on:** May 16, 2014, 07:05:49 AM »

Quote from: Lefty on April 06, 2014, 02:38:30 PM

Camo
Could have been worse, I'm good, no other cars involved, just a very second hand vette and some kerbing to repair.
Cars in a holding yard until Shannon takes a look,
Lefty

Insured with Shannon's

keep us abreast on how they assist in getting your baby back on the road ?.
Best of luck buddy, Jethro

Jethro

sabre · « **Reply #24 on:** May 16, 2014, 07:34:27 AM »

Single pipe is to allow a single catalytic converter (saves cost, weight and heat exposure). Twin system will definitely breath better but would require 2 cats to be legal. If that's not an issue for you, go the twin system.

Lefty · « **Reply #25 on:** May 16, 2014, 07:39:44 AM »

Jethros
Shannons are fantastic
I called them straight after the accident waiting for a tow, they were great, stepped me through what I needed to know and didn't overwhelm me with to much information,
Called them back the same afternoon, paid the excess, and advise them of the preferred repairer, based on a mates and the forums feedback,
Quoting took a while given Easter est, the assessor inspected and called me to say repairs are approved and provided some good advice.
The suspension is being repaired at NSC racing, and the body work at Detroit body works.
So far I'm impressed. I haven't found any other insurer offering the service level offered by shannons and their friendliness.

Cheers,

Lefty

Jethro · « **Reply #26 on:** May 16, 2014, 05:33:35 PM »

Great o hear Lefty, we all pay heaps to be insured it's not till one of us has to claim do we really find out what insurances companies are like

Lefty · « **Reply #27 on:** June 23, 2014, 01:50:45 PM »

Quote from: sirfixalot on April 06, 2014, 10:05:53 PM

I have a drag link,idler arm,pitman arm which should get it steering straight, & a trailing arm not sure which side, where is the car?

Suffix a lot

Referring to the above offer would you have or be able to make a drag link for. 79 RHD vette or know where one could be made. This one item is proving elusive for the completion of the underbody works.
Many thank and cheers

Lefty

Edited by Camo

sirfixalot · « **Reply #28 on:** June 23, 2014, 09:22:54 PM »

Drag link used on RHD is usually an xw xy ford. The drag link is forged steel & could be pressed back to shape then x-rayed. I have a jig to check if it is correct & can press it back straight. got any pics

Lefty · « **Reply #29 on:** June 23, 2014, 09:52:40 PM »

Sirfixalot,
Many thanks for the response, I'll send a pm. I'm after your number and I'll get the repairer to call you.
Cheers,
Lefty

Lefty · « **Reply #30 on:** September 29, 2014, 06:18:37 PM »

Hi
Repairs to the car are almost compete with only paint and some adjustments left. There is a slight snag, my 79 has a black aluminium air dam under the car to direct sir into the radiator. It's a fairly robust plaice and the repairer can only source one in fibreglass which I don't feel will be as durable.

Does anyone kno where this part may be sourced locally, otherwise it will need to be manufactured.

Many thank in advance

Cheers
Lefty

sirfixalot · « **Reply #31 on:** September 30, 2014, 08:26:38 AM »

Are we talking about the flat panel under radiator with 3 holes in it boomerang shaped or the small spoiler which goes from guard to guard behind bumper overiders

Lefty · « **Reply #32 on:** September 30, 2014, 09:26:28 AM »

Sirfixalot

We are talking about the small spoiler which goes from guard to guard behind bumper overiders

Cheers

Lefty

Lefty · « **Reply #33 on:** September 30, 2014, 03:34:12 PM »

You can just make it out in the first two photos of this thread
Lefty

sirfixalot · « **Reply #34 on:** September 30, 2014, 05:26:50 PM »

It is normally only thin black maleable plastic I had one mailed from US folded in half straightened it out & layed it in the sun reshaped ok is designed to be bent & twisted

Lefty · « **Reply #35 on:** September 30, 2014, 05:45:29 PM »

Thanks Sirfixalot. Apprected

I'm still keen on the aluminium one as it was on the car before the incident. There apparently is a fibreglass one but I'm thinking it won't last well.
Cheers
Lefty

Lefty · « **Reply #36 on:** November 06, 2014, 08:53:15 PM »

You vet.
Yes 79 vet is back - almost. Car was finished but just a fee minor issues for rectification after first run.
Ncs did a great job on the underbody. It took ages but worth the wait. New mufflers are loud.

Detroit body works did a great colour matching the custom red.

Just need to work out the best way to buy a set of new mickey Thompson 255/60/15 and get a radiator flush.

Any ideas on the tyres?

Cheers

Lefty

MY081 · « **Reply #37 on:** November 07, 2014, 09:50:07 AM »

Hi Lefty i got mine from Rocket at Huntingwood drive Huntingwood .Phone 0288251900.Ray

Lefty · « **Reply #38 on:** November 07, 2014, 10:17:26 AM »

Ray
Many thanks
Lefty

reserved · « **Reply #39 on:** November 07, 2014, 02:49:14 PM »

Competition Engines sometimes have good specials and are cheaper than Rocket, but with delivery added unless it is a good special the pricing ends up the same. I just got 2 sportsman S/R 28X12X15LR (295X50X15) that cost $680 picked up.