Clutch conversion

[JP]

Has anyone converted an auto to manual and also LH to RH drive. I'm curious as to how the clutch was done? Hyd or cable, what pedals were used and so on. This is for a C3.

Thanks
James

[Chromie]

Hi Jp
I have done this type of conversion
I use hydraulic, I use an original clutch pedal and modify it, I use an original bell housing & clutch fork. I also use original gear shifter and linkages.
The clutch slave mount bracket I make myself as well as the push rod.;29;29;29;29

[JP]

Chromie, the hyd master cylinder and slave what were they out off?
Thanks

[Chromie]

They are out of a Holden HK, HT or HG
The clutch slave is modified to allow extra travel

[JP]

Thanks for the info Chromie

[Chromie]

You are most welcome JP;42

[JP]

Chromie, as I have converted from an auto to a manual and dont have the original pedals do you know what pedals I could use or do I have to get corvette ones? Thanks for the help, it is apreciated, and I must buy you a beer one day.
Thanks
James

[Chromie]

Hi JP
As I said earlier
"I use original clutch pedal and modify it"
The pedal box is also modified mainly sleeves and bushes are installed to keep the pedal pivots tight.
As far as other pedals from other cars that is up to you
I use the corvette clutch pedal because it matches the shape of the brake pedal (assuming that yours has a corvette brake pedal)
Hope this helps;42

[JP]

Thanks again Chromie.
James