Welding or Brazing aluminium.

Started by Vettech, September 28, 2015, 08:55:39 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

Vettech

September 28, 2015, 08:55:39 PM
Welding or Brazing Aluminium !?.. I saw a u tube welding Ali sheet and parts, with Propane, the results looked good and easy to do. Has anyone done this or knows where to get it. Seems there is Muggyweld, Aliweld, durafix, SuperAlloy 5. But can't see anyone who sells them. And no I have not broken the car, I'm building a new "Yagi Antenea" for 80-108mhz.
🖕 Vettech.

bfit

#1
September 28, 2015, 09:08:23 PM
Not that easy
Tig is considerably easier , with better results.
In the past CIG  has  sticks to weld aluminium
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.''
Winston Churchill

Vettech

#2
September 28, 2015, 10:03:40 PM
If I was 30 years younger I would lash out and buy a Tig. But these u tubes are recent and the results look satisfactory 4 what I want - some one will come out of the woodwork with some info, I'm sure.
🖕 Vettech.
Print
Go Up Pages1
User actions