ROH rims for corvettes

Started by 77CVT, November 20, 2002, 05:27:59 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

77CVT

Brutus, did you get onto Neale wheels?

AusRs, did you manage to get onto ROH about your spare?

Are wheels spacers/adapters illegal over here?  It wouldn't be hard to get a set of adapters made up to fit a Commodore pattern (120mm bolt circle as oppsed to 120.65 for Chev).  Having adapters to suit Commodores would open up a whole range of rims at a substantially cheaper cost.   I'm sure offset wouldn't be a problem, just getting 8 or 9 inch widths.

77CVT

Apparently ROH are releasing a new range in a week or 2 that will fit a chev pattern.  ;35

Apparently some hounding does pay off!

Watch this space.

Ausrs

see new thread for details:pinki;33

johnny86convert

seemed  to  have  missed  the  thread  here.......if  ROH  chrome  rims  fit  a  monaro  will  they  fit a  vette  stud  pattern,  my  mate  got  his from a  tyre  place  in  waratah  street  sutherland????thery  look  sensational,  five  spoke  I  think?

Ausrs

chev stud pattern 5 on 120mm
holden commondore stud pattern
5 on 120.65
will stress the studs and prob snap them in time
also ofsets will vary between a vette and a commondore

Brutus

I've seen Ford stud patterned wheels drilled out to fit Holdens and visa versa that was quite successful, so surely such a minor discrepency shouldn't present too much of a concern?
Anyone with more of an insight into this?

Ausrs

btw
when i bought my wheels direct from ROH the cost was similar to buying wheels for a commonwhore .......not overly expensive ,i just had to pick them up from silverwater (sydney) and pay cash ;35

sabre

Hey guys,
I talked to a Terry from CC tyres at Penrith yesterday. He can do 16 x 8 in rims for a vette (HQ stud pattern) for $245. 4.5 in pattern with correct offset. I crunched the numbers and a 255/50 - 16 only has a slightly smaller rolling diameter that the original C3 rubber.
He quoted me under $2000 for a complete wheel and tyre package.

BTW I checked. Spacers are a no-go in NSW

Brutus


Ausrs

my roh wheels are 17 inch ...get in touch and i will give you the direct number to a guy at ROH in adelaide who CAN supply 17 inch wheels to suit a vette !!!!!

Brutus

Thanks for that. It's very good to know that. Any chance of a pic of your wheels at all?

Ausrs

i had a pic of my wheels on the thread earlier BUT somehow it wont link anymore :(
will try another one
that didnt work :(
can email one if you want

Ausrs

how come it will no longer allow you to upload a picture to the board ?????????????;30;30;30;30