Anyone need a corvette racecar?

[Miss Independent]

Could see some of you revheads around Wakefield or Winton in this come Leadfoot day!! Wondering if customs would let it in    Currently for sale Asking 49,000US

[raafrebel]

Bit hard to tell buy the pictures, but is that based of a C4 or C5? What are the engine specs??any more details about the build?  Also, were abouts in the US is it?

It doesnt look too shabby at all! I like it!
Dan

[Miss Independent]

A vintage 1968 Corvette convertible race car. A turnkey ( actually, just push the button... ) race car. Its ready to go. ALL fluids have been changed and flushed. Over 120k invested with receipts. Fresh build, 1 test day only. (It's a rocket !! ) Brand new dry sumped Gibbs SB2 motor, new Jericho transmission, Tilton 3 disc clutch, new 4:11 rear, amazing Nascar style roll cage, 3 way Halon fire suppression system, new seats and belts, cool shirt cooler and shirt, 3 sets of wheels and tires including a brand new set of Hoosier slicks. Lightweight Greenwood wide body, with fully removable body panels. Trans and diff coolers, full heim joint suspension, adjustable sway bars, huge radiator,Painless wiring system, Bilstein coil overs, Randy's custom rear end, with Toms big axles and studs. Willwood pedal and Willwood 4 piston big brakes all around that haul this ballistic Corvette to a stop...... VERY quickly. The list goes on and on. No expense was spared in building this Vintage rocketship.


Ok here's the COOL part. The car comes with TWO log books, and a clear title. The first log book dating back to 1972 !! The car raced at famous courses like Watkins Glen, Mid-Ohio and all the big tracks. Good finishing history. This is the real deal Vintage Corvette race car. Not for the timid, or weak of heart. In the right hands this car is a first place car, no excuses, it's all there, and ready to go. The second log is current and has a 2013 tech inspection done to it. Put gas in it and go. This car can run in all the Vintage classes, GT1, SPO,V8 Stock car, or dozens of other race groups !!


Long list of spares, brakes, rotors,4 a arms, half shafts, u joints, bearings, plumbing hardware and hoses. Gauges and wiring, belts hoses, fuel pumps, and filters, manuals, set up sheets, and much more.You'll be quite happy.


Don't let life, or this opportunity pass you by.

Asking price: $65,000, OBO PRICE REDUCED FOR THE HOLIDAYS !! 49K STEALS IT !!

I urge you take make a realistic offer, Add it all up and it's around 120k. My loss might be your lifelong dream come true. Check the price against some of the real quality pieces on the race site,

http://www.race-cars.com/carsales/complist.htm

Just finished a 3 year build on this 68 Corvette, completed in 2013. This is a rock solid 1968 corvette chassis with full NASCAR style cage and supports.

Independent rear suspension, near zero scrub front suspension. Chevy SB2.2 engine and Jericho 4 speed set up with overdrive. Chassis engineered by Jay Roese, GM auto engineer and motor built by TWE machine and Gus Brewer from Gibbs Racing.

Engine
•   Engine Builder: TWE machine/Gus Brewer Gibbs Racing
•   Manufacturer: Chevrolet
•   Type: SB2.2
•   Displacement: 331
•   Horsepower: 605 Built for longevity !!!
•   Torque: 566
•   Induction: Holley 4bbl, high-rise manifold
•   Heads: GM SB2.2. fully ported by Gibbs racing
•   Block: GM Bowtie
•   Main Caps: 4 bolt splayed
•   Crankshaft: Bryant
•   Connecting Rods: Carrillo
•   Pistons: CP domed
•   Camshaft: reed roller
•   Valves: Titanium
•   Valve Train: T&D rockers,CV pushrods
•   Clutch: QM
•   Pressure Plate: QM
•   Flywheel: QM
•   Exhaust: 4-2-1 stainless hand built
•   Total Time: Dyno time only
Fuel System
•   Fuel Cell
•   Manufacturer: ATL, Fuel Safe
•   Age: new
•   Capacity: 32
•   Fuel Pump: Holley electric
•   Fuel Type: 110 octane min.
Oil/Water System
•   Radiator: Aluminum dual cross flow
•   Water Rad Location: front
•   Water Pump: Howard Stewart

Electrical System
•   Ignition: Electromotive multicoil
•   Alternator: CV single wire
•   Battery: 16 volt with charger

Transmission
•   Manufacturer: Jericho
•   Type: 4 speed with overdrive 3rd
•   Gears: changeable
•   Shifter: Hurst pro. setup at Gibbs racing
•   Trans Cooler: yes and pump
•   3rd gear setup as overdrive
Rear End
•   Manufacturer: Randy's rears/GM
•   Type: GM Corvette
•   Cooler: yes and pump
•   Ratio: 4.10
•   Case: iron corvette racing HD
•   Differential: limited slip
•   Axles: HD custom
•   Converted from 10 bolt ring gear to 12 bolt (stronger)
Body
•   Construction: 1973 corvette with ACI turbo flairs. Fiberglass
•   Color: Black
•   Paint: enamel
•   Condition: very good
•   Flames on front just for fun
Chassis
•   Type: Fully caged corvette
•   Builder: TWE and Jay Roese
•   Material: steel
•   Finish: enamel
•   Condition: new
•   Front Suspension: unequal arm, near zero scrub and bump
•   Rear Suspension: Guldstrand 5 link independent,HD hubs and bearings
•   Shocks: Bilstien monotube coilovers, new custom valved
•   Brakes: Outlaw calipers, Coleman discs
•   Steering: Woodard R&P power
•   Wheels: Diamond 16
•   Tires: Goodyear (setup only)


Interior
•   Color/Finish: Gold enamel
•   Material: steel panels
•   Fire System: Firebottle remote w/ 3 sprayers
•   Restraints: 6 point
•   Gauges: full assortment
•   Steering Wheel: padded 3 spoke, quick disconnect
•   Condition: Excellent

[raafrebel]

Yes , well it certinly looks like a good deal, I know a guy who might be keen,

what state is it in?

[Miss Independent]

South Florida  contact is offshore241@aol.com