NSW Corvettes

Items for Sale by Club Members & Friends => Wanted to Buy => Topic started by: Jethro on April 28, 2012, 10:46:48 AM

Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: Jethro on April 28, 2012, 10:46:48 AM
would anyone be able to help me get these two parts off my 1969 muncie 4 speed they are what I believe you refer to as 1st -2nd and 3rd-4th  input selector shafts? The actual selectors arm bolt onto them and both of these shafts are badly worn on the flats ? Sorry about the bad pic's I  got them sent to me by gear box mechanic...  
Tks Jethro


(http://i261.photobucket.com/albums/ii43/jetrhottracey/P1000766.jpg)
(http://i261.photobucket.com/albums/ii43/jetrhottracey/P1000767.jpg)
(http://i261.photobucket.com/albums/ii43/jetrhottracey/P1000768.jpg)
(http://i261.photobucket.com/albums/ii43/jetrhottracey/P1000770.jpg)
(http://i261.photobucket.com/albums/ii43/jetrhottracey/P1000771.jpg)
(http://i261.photobucket.com/albums/ii43/jetrhottracey/P1000772.jpg)
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: bfit on April 28, 2012, 04:43:06 PM
Jethro
first  the engine now the gear box

you know what they say about opening a can of worm
Bfit


 
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: Jethro on April 28, 2012, 10:37:20 PM
Quote from: Bfit link=topic=9179.msg1045942623#msg1045942623
Jethro
first  the engine now the gear box

you know what they say about opening a can of worm
Bfit


 


:bang::bang::bang::bang::bang::bang::bang:
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: MADVET on April 29, 2012, 07:27:25 AM
Jethro,

Are you refering to the shift fork? The bit that looks like a horseshoe on the inside and is conected to a shaft that comes through the cover plate onto which the shifter linkages are bolted on to?

If so searching for "muncie shift fork" comes up with a number of vendors, seen a few for sale on US ebay too.
I've broken a few of these in the past with my old muncie, apparently they don't appreciate the finer points of flat changing.:drag:
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: Jethro on April 29, 2012, 07:43:38 AM
Quote from: MADVET link=topic=9179.msg1045942628#msg1045942628
Jethro,

Are you refering to the shift fork? The bit that looks like a horseshoe on the inside and is conected to a shaft that comes through the cover plate onto which the shifter linkages are bolted on to?

If so searching for "muncie shift fork" comes up with a number of vendors, seen a few for sale on US ebay too.
I've broken a few of these in the past with my old muncie, apparently they don't appreciate the finer points of flat changing.:drag:


No buddy I'm after the actual shifter shafts that go through the side cover and in fact the shift fork connect to em?????
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: Jethro on April 29, 2012, 10:05:36 AM
Found....

http://www.ebay.com/itm/MUNCIE-4-SPEED-SIDE-COVER-KIT-ROLLER-BEARING-18-410-023-1X-/350560902025?_trksid=m7&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D3%26po%3DLVI%26ps%3D63%26clkid%3D8049747154544401997#ht_500wt_971
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: bfit on May 03, 2012, 05:50:37 PM
Jeff
How's the box going
Did you source the parts
Bfit
Title: 1st -2nd & 3rd-4th selector input shaft selectors
Post by: Jethro on May 03, 2012, 06:02:39 PM
Quote from: Bfit link=topic=9179.msg1045942677#msg1045942677
Jeff
How's the box going
Did you source the parts
Bfit


Yeah Rob, www.Garagemotorsports.com and got them to send out new 1-2, 2-3 and reverse shifter Levers too:grr::grr::grr: just waiting on them to arrive and the box is good to go!