NSW Corvettes

Technical Tips => Engines - Carbies - Exhausts - Dissys => Topic started by: Scott on February 17, 2011, 09:40:28 PM

Title: Oil Filter
Post by: Scott on February 17, 2011, 09:40:28 PM

Does anyone know what oil filter I need for my SBC?

The ryco catalogue doesn't list it, and the staff at supercheap were useless as expected.  Mine is still the US filter, so can't use the number from that unfortunately.

Title: Oil Filter
Post by: RHD.68.l89 on February 17, 2011, 11:20:26 PM

Same as the Holdens with the SBC in them, Z24 from memory. Fits BBC as well

Title: Oil Filter
Post by: 87droptop on February 18, 2011, 08:57:27 AM

bought one last week, just went thru my recycling bin wz40, interchangble with z40, that was from pep's autos

Title: Oil Filter
Post by: Scott on February 18, 2011, 09:10:37 AM

I did check the early holden listing but there was nothing listed for the 5.7L in the early cars.

A cross check on the Z24 shows it should be the right one... This was supposed to be the easy part :)

Title: Oil Filter
Post by: 77CVT on February 18, 2011, 09:12:58 AM

Z24

Title: Oil Filter
Post by: Scott on February 18, 2011, 09:15:29 AM

A quick check shows the Z40 is the short version of a Z24, just FYI.

Title: Oil Filter
Post by: 72vet on February 18, 2011, 09:29:56 AM

 K&N  #HP-3002

http://shop.rocketindustries.com.au/products/KNHP-3002

Title: Oil Filter
Post by: RHD.68.l89 on February 18, 2011, 03:18:08 PM

Back then it would have been 327 or 350 NOT 5.7l