NSW Corvettes

Technical Tips => Brakes, Suspensions, Steering, Wheels & Tyres => Topic started by: 87droptop on October 12, 2009, 01:29:53 PM

Title: c3 brake booster
Post by: 87droptop on October 12, 2009, 01:29:53 PM

Hi all, whats the best and easiest way to remove a c3 ( 1968 ) brake booster ? looks to me like removing the dash is not an option.... thanks 4 your responses.

Title: c3 brake booster
Post by: Reklaw on October 12, 2009, 02:24:49 PM

If a '68 is about the same as my '75 then I think, unless you are some sort of contortionist, removing the dash is the only way. LHD or RHD?

Title: c3 brake booster
Post by: 87droptop on October 12, 2009, 04:33:14 PM

LHD, ok... removing the dash is it ... i can see the nuts from under the dash, it would be extremely hard ( done something similar a long long time ago, when i had patience...). was gonna remove it anyway, at a later stage, but looks like soon..
Thanks

Title: c3 brake booster
Post by: MADLT1 on October 12, 2009, 06:35:53 PM

you dont have to remove the on a rhd  dash,at least not on a 71,socket set extension bar with a swivel jiont will do ythe trick,it is a pian but you will get them 4 little suckers:b2

Title: c3 brake booster
Post by: 87droptop on October 12, 2009, 10:19:41 PM

ok, at least now i have a good idea how much of a S**T  job this is going to be. thanks everyone 4 your input.