NSW Corvettes

Technical Tips => Post 84 => Topic started by: Stingraynut on July 23, 2003, 12:03:15 AM

Title: Will an Aussie heater blower fit a C4 ?
Post by: Stingraynut on July 23, 2003, 12:03:15 AM

I’ve finally fixed all my climate control front panel problems on my 88 Corvette – I’m almost an expert about it now so ask away.

My blower was stuck on one speed and it turned out to be an inline fuse – too easy.

 Now that it’s working I can see that I need to find a similar but more powerful blower because this one is doing about half what I’ll need for the Cairns summer.

There must be a Holden equivalent, surely. Does anyone have any suggestions ?

S’nut

Title: Will an Aussie heater blower fit a C4 ?
Post by: 77CVT on July 23, 2003, 09:05:54 AM

Stick 24 volts to it!  ;laugh;laugh

Sorry..........I got nuthin'. :b2

Title: Will an Aussie heater blower fit a C4 ?
Post by: Stingraynut on August 11, 2003, 06:32:12 PM

The answer is

YES !

I've got a S/H one from a WB Holden (1982), bolted straight onto my 88. Had to alter the airpipe a tad.

Unfortunately it doesn't blow any harder than my old one so I've nbow ordered one from Dave at Pontiworld

I don't expect the new one to blow harder, I might be pleasantly suprised but I doubt it, I have to give it a go and of course it will last for several years.

S'nut

Title: Will an Aussie heater blower fit a C4 ?
Post by: 77CVT on August 12, 2003, 08:20:15 AM

Nice research!

You can get a newer fan for C3's that will push more air but I don't know of one for C4's yet.