NSW Corvettes

Technical Tips => Brakes, Suspensions, Steering, Wheels & Tyres => Topic started by: Shaun on June 17, 2007, 09:01:34 PM

Title: steering box
Post by: Shaun on June 17, 2007, 09:01:34 PM

Does anyone know the GM part number for a power steering  pump seal kit .1985 ( same pump 84 -91)

If I know the number I will see if I can get the kit in Aus,
The Kit is only $20 US , but I would prefer not to pay for the postage as it will probably be more than the kit.

Title: steering box
Post by: ozpont on June 17, 2007, 09:52:47 PM

Shaun.. theres a couple of different kits actually listed in the GM parts books for the 85 "ERA" but really only one pump listed...  .. # wise.. try around  for #36-350760 or U.S. Edelmann brand #8633.  The kit is actually only $22 in Australia ..  cheaper then the U.S. quoted you. .IF .. IF.. this is what your box should look like if re-doing the original. Also if the main bearing has gone.. # 26001378 should be used.. WHICH.. may be available from Holden..(try them too) .. it retails in the US for around US$12- $15 at a dealer or about A$16 there.  Locally you might like to try "Uncle Sams" in Adelaide (Adrian Cowland) on 088 264 9556.. or Eagle Spares on 03 9793 5544 in Dandenong.

(http://www.ecklers.com/images/vette/37773.jpg)

Title: steering box
Post by: nifty on June 17, 2007, 10:14:41 PM

shaun you have a u2u

Title: steering box
Post by: ozpont on June 18, 2007, 10:48:16 AM

Shaun.. the last listed GM # is 26024155.
Hope that helps.

Title: steering box
Post by: Shaun on June 21, 2007, 10:00:37 PM

Thanks OZPONT for the part number,
Holden have a few in stock $7 , I bought 2  couldnt resist.

Title: steering box
Post by: 85V on June 21, 2007, 11:39:57 PM

Im new here but saw this and was going to say suggest some people called  Ecklers.com where I brought one in april but thats was like US$45 with delivery so you got a good deal.