NSW Corvettes

Technical Tips => Post 84 => Topic started by: 87Z51 on July 18, 2005, 06:40:14 PM

Title: C4 TPI Throttle cable part #
Post by: 87Z51 on July 18, 2005, 06:40:14 PM

If your pre '89 TPI RHD conversion has used the original fittings on the plenum and firewall for the accelerator cable then this is the one you need.

GM #9929775
Available from your local Holden dealer approx $30

Note. Will only fit TBs with the stud for cable attachment.
Will not work on '89 and later where cable fits in a quadrant on the TB.

Title: C4 TPI Throttle cable part #
Post by: 77CVT on July 19, 2005, 11:34:05 AM

(http://www.corvetteforum.com/zeroimg/smilies/thumbsup.gif)

Title: C4 TPI Throttle cable part #
Post by: Vette Obsessed on July 19, 2005, 10:58:33 PM

Thanks for sharing that 87Z51. (http://www.corvetteforum.com/zeroimg/smilies/thumbsup.gif)