Would there be any member who has a VF 2 HSV with LSA engine. Manual transmission would be good.
Or anyone who has AN LSA in standalone configuration.
I'm looking for a photo of the OBD2 connector to see what pins are used.
If anyone can assist I would appreciate the help.
Bfit
Must have been a Very Hot buy Bfit, sounds like it was hot enough to burn the plugs and connectors off. !?!?!
nothing between the turret and the floor pan is usable.
The clove box was melted / burned remains laying on the floor , however the owners manual survived with a little scorching.
other than that I have some good GTS panels to sell.
Bfit
Maybe also try the HSV Owners Club.
If it's the OBD2 connector under the dash it would have to be a standard layout/pinout for the diagnostic tool to connect. I'd be searching the webs
https://components101.com/sites/default/files/component_pin/OBD2-Connector-Pinout.png
Quote from: RHD.68.l89 on May 14, 2020, 10:05:51 AM
If it's the OBD2 connector under the dash it would have to be a standard layout/pinout for the diagnostic tool to connect. I'd be searching the webs
https://components101.com/sites/default/files/component_pin/OBD2-Connector-Pinout.png
I thought the same however GM depending one what other controls are used use different pins.
In the Camaro 2010/15 the pin out is 1,4,5,6,12,13,14,16. I think the Australian version would be the same but need to be certain.
Bfit