NSW Corvettes

Technical Tips => Brakes, Suspensions, Steering, Wheels & Tyres => Topic started by: wabco40 on August 22, 2018, 05:47:39 PM

Title: C3 front hub dimensions
Post by: wabco40 on August 22, 2018, 05:47:39 PM

Hi,

Hoping someone can help me out. I require the length of the front bearing and grease cap on a standard C3 front hud. See measurement F on the picture below. I need it from the mounting face of the rotor to the end of the grease cap.
I am away working at the moment so cannot measure my own car. Any help would be much appreciated,
Thanks.
Brad

(http://i1233.photobucket.com/albums/ff391/wabco40/IMG_5644_zpsamxd4hft.jpeg) (http://s1233.photobucket.com/user/wabco40/media/IMG_5644_zpsamxd4hft.jpeg.html)

Title: Re: C3 front hub dimensions
Post by: bfit on August 22, 2018, 09:00:33 PM

Tomorrow mate
Bob

Title: Re: C3 front hub dimensions
Post by: wabco40 on August 23, 2018, 12:09:54 AM

 Thanks Bob, I knew I could rely on you  :thumb:
If you get time could you measure D and E as well.

Title: Re: C3 front hub dimensions
Post by: bfit on August 23, 2018, 05:51:02 AM

Will do
Bob

Title: Re: C3 front hub dimensions
Post by: bfit on August 23, 2018, 09:08:00 AM

Morning Brad
I measured a 69 & a 79 im giving you the measurements with no allowance for clearance.
D  6.975’’
E  1.232’’
F  2.507’’
Bob

Title: Re: C3 front hub dimensions
Post by: wabco40 on August 23, 2018, 09:21:02 AM

Thanks Bob, much appreciated  :thumb:

Brad

Title: Re: C3 front hub dimensions
Post by: Jethro on August 24, 2018, 09:28:21 PM

What you got in mind now Brad ?

Title: Re: C3 front hub dimensions
Post by: wabco40 on August 24, 2018, 10:18:28 PM

Getting some new wheels made through American Racing, Jethro. Trying to get them to machine the center mounting hub smaller but still have caliper and bearing grease cap clearance.

Title: Re: C3 front hub dimensions
Post by: Jethro on August 25, 2018, 08:54:58 AM

Ahhhh, I knew you'd be up to something special, cant wait to see what wheels you've gone with  :toetapping: