NSW Corvettes

General Discussion Area => Corvette Related Chat => Topic started by: bfit on July 13, 2017, 05:47:20 PM

Title: Program fob
Post by: bfit on July 13, 2017, 05:47:20 PM

Has anyone had any success in programming a new fob to there c6
Bfit

Title: Re: Program fob
Post by: Vettech on July 13, 2017, 08:50:25 PM

Probably like my Mustang bob, take key to rear and put in the key hole above the plate, turn on/off five times dash will say " ready for fob 3" (whatever) .
Then place new fob into slot in or near the glove box, has to be right way around., after a few seconds dash will say " ready for fob 4"  simple.....

Title: Re: Program fob
Post by: Vettech on July 13, 2017, 08:58:17 PM

Of course this bates the question or questions.

Is ignition on?

Is boot/rear open?

Is glovebox open ?

BOL

Title: Re: Program fob
Post by: bfit on July 13, 2017, 09:30:49 PM

I have tried everything , that I can find on the web .
No good.
Even the tech 2 won't do it. With tech2 set up and remote programming activated , nothing.

Title: Re: Program fob
Post by: Vettech on July 13, 2017, 10:07:09 PM

I saw something about having the fob in the slot facing the driver (buttons), but on LHD CAR, so have u tried fob in slot all v different ways.
BOB.

Title: Re: Program fob
Post by: bfit on July 13, 2017, 10:32:21 PM

Yes  tried that to.
I may have to pull the dash and see if the sender is in there next to the slot

Title: Re: Program fob
Post by: Vettech on July 13, 2017, 10:33:25 PM

[PDF] C6 Fob Programm Instructions...........

@ brazosrivercc.com tech-tip- articles..

Pdf file which sets out concisely the procedure, if it does not work - then I suggest its the work of the converters once again.

If you are lucky it will be hanging behind dash - else they cut it out and tossed it in the too hard basket.

I wonder who did your conversion!?!

BOB.

Title: Re: Program fob
Post by: bfit on July 13, 2017, 10:50:41 PM

Three guesses start with perform and expand.
 I have contacted them three  times,
It's is quite odd they have  no idea of what was done in the conversion,
 it would not surprise me if the transmitter  in the glove box is not there

Title: Re: Program fob
Post by: Vettech on July 13, 2017, 11:01:41 PM

Too late to off load it, now its been on the forum.

Any way who needs a third key.

Get over it and move on - dont you just love it when people say that.

BOB.

Title: Re: Program fob
Post by: bfit on July 14, 2017, 05:59:07 AM

Never let a challenge get in the way of suscess

Title: Re: Program fob
Post by: bfit on July 14, 2017, 07:04:27 PM

Thank to Jagsy ( Richard) for an extract from a service manual.
I'm hopefull I'll sort the fob programing tomorrow .
Bfit

Title: Re: Program fob
Post by: MY081 on July 14, 2017, 09:41:05 PM

Thats what being in a great club is all about !!!!!( Good Luck Bob )

Title: Re: Program fob
Post by: jagsy on July 15, 2017, 10:40:07 AM

No probs Bob, fingers crossed, let us know how you get on

Title: Re: Program fob
Post by: Vettech on July 15, 2017, 11:48:38 AM

Dont let those mongrels " fob" you off Bfit - keep at em.

Title: Re: Program fob
Post by: Jethro on July 17, 2017, 07:41:29 PM

Ahhh your old 69 never gave you that much trouble Bobby :(

Title: Re: Program fob
Post by: Vettech on July 17, 2017, 08:30:33 PM

Well Bfit, whát is happening, have you solved the "fobbed" issue ?......

Title: Re: Program fob
Post by: bfit on July 17, 2017, 09:03:15 PM

Quote from: Vettech on July 17, 2017, 08:30:33 PM

Well Bfit, whát is happening, have you solved the "fobbed" issue ?......

Yes I now have a spare 

Title: Re: Program fob
Post by: Vettech on July 18, 2017, 11:23:31 AM

I'm over whelmed by the wealth of information on your success.