Print Page - Small lathe Job

Title: Small lathe Job
Post by: 76Vett on June 08, 2014, 10:24:21 AM

Hi All. Does anyone have a metal lathe and can do a small turning job for me OR can recommend a small engineering company, not to far from the shire.
Thanks, Allen

Title: Re: Small lathe Job
Post by: sirfixalot on June 08, 2014, 02:09:00 PM

What do you need can probably do it for you

Title: Re: Small lathe Job
Post by: 76Vett on June 08, 2014, 02:58:36 PM

Hi Geoff. On the standoffs for my wheel spinners (center caps) the thread is too long so the spinners do not go on all the way, about 2 threads showing, see attached photo. I just need these couple of extra threads turned off, I could hacksaw them of but turning them off would be cleaner.
Thanks.

Title: Re: Small lathe Job
Post by: bfit on June 10, 2014, 10:15:11 AM

mate
contact me re machining
Bfit

Title: Re: Small lathe Job
Post by: 76Vett on June 11, 2014, 07:51:42 PM

Thanks, all for the offers I will be in touch.

NSW Corvettes

General Discussion Area => General Chat => Topic started by: 76Vett on June 08, 2014, 10:24:21 AM