NSW Corvettes
Technical Tips => Transmissions - Differentials => Topic started by: 87droptop on June 29, 2010, 09:40:18 PM
-
Hi everyone, i hooked up the linkages to the box, 1968, i think it is a muncie... there are two long shaped brackets and one short one that connect the rods to the box selectors. i placed them from rear to front: short, long, long. the gear stick is back all the way, cant move it forward or sideways. anyone has an idea as to how to fit these?
Thanks.
-
These Muncie pictures might help:
(http://i39.tinypic.com/nyg42h.jpg)
(http://forums.corvetteforum.com/attachments/c1-and-c2-corvettes/47639912d1247016717-64-keeps-getting-stuck-in-1st-gear-t-trans-comp1.jpg)
-
thanks, box looks very similar, my brackets between the rods and the box are slightly different, and the short one definitly not bent like this one, but i did have it from the top not the bottom.... great help mate, will try again, cheers.