NSW Corvettes

Technical Tips => Transmissions - Differentials => Topic started by: sirfixalot on July 03, 2016, 08:34:54 AM

Title: LSD additive
Post by: sirfixalot on July 03, 2016, 08:34:54 AM

Anyone used LSD oil ie (Nulon, Penrite, etc) without adding GM LSD additive to the mix, comments for & against

Title: Re: LSD additive
Post by: rosco on July 03, 2016, 11:35:20 AM

just rebuilt mine and was recommended castrol axle limited slip 85w-140. Works a treat no problems at all.
Repco part number 3377666.
Only use the above type, Castrol makes a couple limited slip oils which are not recommended.

Rosco

Title: Re: LSD additive
Post by: bfit on July 03, 2016, 04:42:26 PM

I use limslip 90
Works for me, no clutch noises at all
Bfit

Title: Re: LSD additive
Post by: wabco40 on July 03, 2016, 05:52:26 PM

I used this. It all works ok.

http://www.penriteoil.com.au/pis_pdfs/GEAR%20OIL%2080W-90%20AUGUST%202013.pdf (http://www.penriteoil.com.au/pis_pdfs/GEAR%20OIL%2080W-90%20AUGUST%202013.pdf)