NSW Corvettes
Technical Tips => Engines - Carbies - Exhausts - Dissys => Topic started by: rebel on April 08, 2003, 10:40:30 PM
-
OK gang,
Here's Version 2.1 ... pretty much the same as version 2.0, except that the rocker covers have a nice aluminium textured surface and the raised letters are as highly polished as I can get 'em ....
Motor1 (http://www.ement.com/Photo/DSC00287a.jpg)
Motor2 (http://www.ement.com/Photo/DSC00288a.jpg)
Motor3 (http://www.ement.com/Photo/DSC00289a.jpg)
With the extractors ceramic coated she's pretty much done except for ideas of a Rebel mural under the bonnet and the words "CorvetteRacing" across the front cross member. After that, tidy some cabling and add the FULL STOP to that project!
Cheers!!
-
Very nice rebel, just don't let Brutus near your car with his polish, you'll never get it back. Did you coat the inside of those rocker covers with anything? I was looking at buying those but was told they should be coated with glyptal inside first as they seep oil.
-
Scott81, I usually only let professionals polish my car .... ;laugh
Only jokin' Brutus, I'm certain you do a fine job .....
I did actually coat the inside and think it was called Glyptal. I'll confirm and let you know.