91
NSW Corvette Club Runs, Events & Notices / Re: Xmas in July - Cruise
« Last post by Vettech on July 02, 2023, 08:05:48 PM »Getting close - get your order in - should be a great outing.
NSW Corvettes Unlimited Car Club Inc
Recent Posts
92
Transmissions - Differentials / Re: Rear bush kit recommendations
« Last post by sirfixalot on June 26, 2023, 06:43:59 PM »Poly bushes are available locally from Ponti world at Oak Flats. Energy Suspension brand they are available in red or black have had in my 78 for quite a few years with out any problems. I have used rubber grease instead of supplied lube which looks like Vaseline. Can be ordered on line with free express post if order is over $150 from memory. They have all consumables for C3 & C4
93
Transmissions - Differentials / Re: Rear bush kit recommendations
« Last post by Matt G on June 11, 2023, 11:21:09 AM »Thanks Vettech. I search for the grease as well. 👍
94
Corvette Related Chat / Re: CAR SHOW
« Last post by 86er on June 02, 2023, 05:26:13 PM »See you at the Ampol Jorge
95
Corvette Related Chat / CAR SHOW
« Last post by toyvet on May 29, 2023, 06:48:54 PM »HELLO CLUB MEMBERS THERE IS A CAR SHOW THIS SATURDAY NIGHT AT GREENWAY PLAZA WETHERILL PARK FROM 6 PM TO 9 PM WE MEET AT THE AMPOL SERVICE STATION AT THE HORSLY DRIVE WETHERILL PARK 4 PM LIVING 4.45 PM FOR A SHORT DRIVE TO THE SHOPPING CENTER
ANY QUESTION PLEASE CALL ME 0423251121
REGARDS
JORGE
ANY QUESTION PLEASE CALL ME 0423251121
REGARDS
JORGE
96
Transmissions - Differentials / Re: Rear bush kit recommendations
« Last post by Vettech on May 23, 2023, 05:10:27 PM »I did a 78 years ago, cant remember supplier, poli type all round.
Stiffens suspension, make sure you use the special grease plus plus or they squeak & squeal if not enough used.
And believe me you cant use enough.
The only bolts I changed were the long hangers on the rear (ring barked) - all else looked fine.
I have gymkana suspension option - took a while to get front sway bar bushings as its enormous. Ended up with rubber.
Once done - a new set of Shockies will give you great handling.
If doing front you need a couple of special adaptors to press out the wish bone thingy/bushing.
A 12t bottle jack press works fine.
Stiffens suspension, make sure you use the special grease plus plus or they squeak & squeal if not enough used.
And believe me you cant use enough.
The only bolts I changed were the long hangers on the rear (ring barked) - all else looked fine.
I have gymkana suspension option - took a while to get front sway bar bushings as its enormous. Ended up with rubber.
Once done - a new set of Shockies will give you great handling.
If doing front you need a couple of special adaptors to press out the wish bone thingy/bushing.
A 12t bottle jack press works fine.
97
Transmissions - Differentials / Rear bush kit recommendations
« Last post by Matt G on May 20, 2023, 02:54:49 PM »Hi All,
Looking for recommendations for a full rear poly bush kit for my 1970. I’ve got a rear clunk (which may be my uni joints), but the bushes are in mixed condition, so I figured that I’d start there. I found this from Ecklers (https://www.ecklerscorvette.com/1963-1982-corvette-total-suspension-kit-polyurethane-25-108381-1.html) but I’m sure that wiser people have some experiences that will help more.
Also, is it worth changing all bolts at the same time? I would think yes (and keep good originals as spares), but wanted to check. Bolt kit source recommendations are also welcome.
Thanks, Matt
Looking for recommendations for a full rear poly bush kit for my 1970. I’ve got a rear clunk (which may be my uni joints), but the bushes are in mixed condition, so I figured that I’d start there. I found this from Ecklers (https://www.ecklerscorvette.com/1963-1982-corvette-total-suspension-kit-polyurethane-25-108381-1.html) but I’m sure that wiser people have some experiences that will help more.
Also, is it worth changing all bolts at the same time? I would think yes (and keep good originals as spares), but wanted to check. Bolt kit source recommendations are also welcome.
Thanks, Matt
98
Wanted to Buy / Re: Bb c3 radiator
« Last post by bfit on May 09, 2023, 04:46:45 PM »the BB support take a wider radiator. having said that i could make do with the SB version i only need it for a sample to manufacture a support to take a VF LSA radiator.
PM me your contact info
Bfit
PM me your contact info
Bfit
99
Wanted to Buy / Re: Door cards for 71.
« Last post by jjl on May 09, 2023, 04:22:28 PM »I have a couple of used black from a 70. They have the holes for window cranks.
100
Wanted to Buy / Re: Bb c3 radiator
« Last post by jjl on May 09, 2023, 04:20:48 PM »What is the difference between bb and sb? I have a good sb from a 70.
