NSW Corvettes

Technical Tips => Transmissions - Differentials => Topic started by: DA383 on November 27, 2009, 12:22:15 PM

Title: leaking th350
Post by: DA383 on November 27, 2009, 12:22:15 PM

hi all
 i have oil leaking out of where the kick down cable goes into the gearbox, i have already cleaned both surfaces and silastic it together to seal it but oil still comes out, is there a trick to this? does it need a gasket or o-ring ? any help would be appreciated.
thank you dennis

Title: leaking th350
Post by: 77CVT on November 27, 2009, 03:41:39 PM

From memory it should have an o ring.  I think there were some that had a rubber sleeve type but if your end has a groove in it it will be an o ring type.

:beer: