NSW Corvettes
Technical Tips => Brakes, Suspensions, Steering, Wheels & Tyres => Topic started by: 72C3 on June 14, 2017, 04:18:37 PM
-
Has anyone bought a fibreglass rear spring from ecklers. I am going to replace mine as I think it is the original and the rear is sitting a bit to low, ride is sloppy and I have to avoid every bump in the road. It is a 72, 350 and relatively standard. I am thinking that the 315 lb would suffice. I will replace the rubbers and mounting hardware at the same time. I think the shocks were replaced during its body off restoration in 2010. Any comments would be appreciated before I commit. I nominated ecklers due to discounts offered through the club.
Thanks
Stu
-
I'd go 330 from vansteel or VBP
If you are tinning wider rims you can get a shortened spring.
Bfit