NSW Corvettes
Technical Tips => Brakes, Suspensions, Steering, Wheels & Tyres => Topic started by: wabco40 on August 22, 2018, 05:47:39 PM
-
Hi,
Hoping someone can help me out. I require the length of the front bearing and grease cap on a standard C3 front hud. See measurement F on the picture below. I need it from the mounting face of the rotor to the end of the grease cap.
I am away working at the moment so cannot measure my own car. Any help would be much appreciated,
Thanks.
Brad
(http://i1233.photobucket.com/albums/ff391/wabco40/IMG_5644_zpsamxd4hft.jpeg) (http://s1233.photobucket.com/user/wabco40/media/IMG_5644_zpsamxd4hft.jpeg.html)
-
Tomorrow mate
Bob
-
Thanks Bob, I knew I could rely on you :thumb:
If you get time could you measure D and E as well.
-
Will do
Bob
-
Morning Brad
I measured a 69 & a 79 im giving you the measurements with no allowance for clearance.
D 6.975’’
E 1.232’’
F 2.507’’
Bob
-
Thanks Bob, much appreciated :thumb:
Brad
-
What you got in mind now Brad ?
-
Getting some new wheels made through American Racing, Jethro. Trying to get them to machine the center mounting hub smaller but still have caliper and bearing grease cap clearance.
-
Ahhhh, I knew you'd be up to something special, cant wait to see what wheels you've gone with :toetapping: