NSW Corvettes
Technical Tips => Brakes, Suspensions, Steering, Wheels & Tyres => Topic started by: RAY66 on August 13, 2009, 08:21:58 AM
-
Can anyone send me to some one local Parramatta NSW, or can i do it myself ? she scraps on my driveway . Will going to a 60 seres tyre help ?
-
For the rear you can wind the spring bolts up and raise it that way. for the front - new springs.
-
Welcome to the forum Ray66, what year is your Corvette?
-
going to 60 series tyre wont fix your problem this wil only throw your speedo out .
any suspension specialist can help raise your car. Pedders for instance
I had the same problem with my car solved it by using the neighbours driveway
-
Originally posted by vet84y
I had the same problem with my car solved it by using the neighbours driveway
;53 ;53
-
60 series tyres with the SAME width you have now will increase the hight of the tyre...which in effect lifts the car...
the 60 series means its 60 % of the width or the tyre... called aspect ratio..
but correct it will play around with the speedo, and odometre...
but that can be fixed with an adaptor....
-
but by far the easlist solution is to buy vet84y 's neibors house...and just park it there.:22
-
Hi Ray,
If you can't afford to buy vet84y's neighbours house, it might be worth looking at what's scraping. If it's just the exhaust, perhaps it can be modified - much easier than raising the rest of the vehicle.
Bob
-
Maybe an easy cheap way,coil spacer or springs
http://www.vbandp.com/Our%20Catalog/source/page_18.htm
-
Photo's ?
-
Photo's ?
Is this what ya wanted Demonx:bannana::bannana::bannana:
[IMG=700x525]http://i261.photobucket.com/albums/ii43/jetrhottracey/IMGP0080.jpg[/IMG]