NSW Corvettes
Restoration & Modification Projects => Restoration Projects => Topic started by: jolinari on January 04, 2007, 02:19:49 AM
-
hi guys,
Just wondering whether anyone would be able to help in regards to restoring an original master cylinder...An original master cylinder that is in a horrible condition, corroded, rusty..you name it.
Suppliers in NSW would be great
thanks
-
Hi jolinari ;42
I have brake master cylinder kits in stock:luv
Just about any good brake place can resleeve your brake master cylinder;27
However all this is no good if your master cylinder has a badly rusted surface;37
Get a wire brush on a drill and clean the outside of your master cylinder, if this surface is good after cleaning then get it resleeved;41
Burt Brothers Brakes in Fairfield are very good with resleeving brake master cylinders and will be able to kit and assemble for you as well:{
Hope this helps;)
-
Originally posted by Chromie
Hi jolinari ;42
I have brake master cylinder kits in stock:luv
Just about any good brake place can resleeve your brake master cylinder;27
However all this is no good if your master cylinder has a badly rusted surface;37
Get a wire brush on a drill and clean the outside of your master cylinder, if this surface is good after cleaning then get it resleeved;41
Burt Brothers Brakes in Fairfield are very good with resleeving brake master cylinders and will be able to kit and assemble for you as well:{
Hope this helps;)
thanks for the info Chromie...u have u2u
-
I would prefer that you use my email address ;42
scott@corvette.net.au
-
no worries...just sent u one ;46
-
Originally posted by Chromie
However all this is no good if your master cylinder has a badly rusted surface;37
Hope this helps;)
what do you think Chromie? is it worth it?
(http://i24.photobucket.com/albums/c25/jolinari/Photo_0000-2.jpg)
(http://i24.photobucket.com/albums/c25/jolinari/Photo_0001.jpg)
(http://i24.photobucket.com/albums/c25/jolinari/Photo_0002.jpg)
-
Joe if that one of yours is not suited for resleeving, I still have my old one. Your quite welcome to it if it suits your model.
-
Originally posted by Cameron 77C3
Joe if that one of yours is not suited for resleeving,
useless u reckon Cam?
-
I don't know Joe but IF it turns out that yours is no good and mine is ok, it's yours.
-
hey joe it depends on the inside,it looks fine to me from the outside,the two bails and top cover take to a chrome plater and tell them you want them cad plated in gold,just explain to them what its forand they will know what to do,i just had mine done,$12 at hamilton chrome,though you have many places in sydney to choose from,then just take the master cylinder to a brake place and bobs your uncle....;35