NSW Corvettes
Technical Tips => Transmissions - Differentials => Topic started by: Adam on December 19, 2002, 10:23:56 PM
-
I'm gonna change my TH350's fluid and filter tomoro. I was wondering whats the torque settings for the bolts around the pan when i go to put it back on. I have a new gasket.
Adam
-
Off the top of my head I think it is around 12 - 15 lbs, torqued in 2 stages.
They don't take a lot. Remember to nip them up after a few 100 k's.
-
Adam...Haynes manual says pan torque figures are from 90-130 # per Sq ".
Whatever that works out to in ft/lbs