General Discussion Area > Corvette Related Chat

New Member Introduction

<< < (6/6)

bfit:
Mate I cant comment on that one
I was out of high! school in the 60s
I actually enjoyed  those school days
every day was a challenge to see just what you could do the irritate   the teachers
Bfit

sabre:
 Back to the original topic......... Great ride Scott. Hope you can come to an arrangement so we get to see that beautiful C3 up close soon. Naturally as a member you are always welcome to join us in the 'shopping trolley'.

Regarding colour blindness and traffic lights. The conversation is steeped in ignorance and BS. First hand knowledge. :grr: :laugh:

Slingray:
Thanks all for making me feel very welcome. At present I am looking at preparing the car for full registration and evaluating the work required to pass the 1972 ADR requirements.

The car has held Club rego in Victoria and as such it hasn't had any compliance work done to it thus far. From my research I've compiled the following list of modifications required to compliance a C3 in NSW, you may be able to comment on some of these items, your experience is greatly appreciated.

Here's my list:

I'm going to perform a rear tail light re-wire, swapping the reverse lights for amber blinkers and re-wiring accordingly. I will then fit a small LED strip light above the license plate and wire it up to acts as a reverse light.

I believe I need to fit different low beam lenses so that they dip to the left.

I believe I also need to fit additional turn signals to the front end. Do you know if this is normally performed by installing small additional lights and housings into the front bumper or is there a better method?

I also believe I will need to swap the seat belts for ADR complianced belts.

bfit:
Seat belts talk to Geoff  ( sirfixalot this forum )
On the front low beam lens  change
And a white clearance / park light . You can fit it behind the grill or in the original indicator lens with a divider so you have amber and white in the on lens ( that will keep the original look )

The back is as you indicated, will give a good result
You can fit extra light to the original reversing lens   To keep that original look on the rear
Bfit 

Navigation

[0] Message Index

[*] Previous page