Technical Tips > Brakes, Suspensions, Steering, Wheels & Tyres

C2-C3 steering box rebuild

<< < (4/4)

bfit:
They are not good
But the only tooth that is reply bad is on the rack
 If the mesh is good in th straight ahead position. It will still work
 When box is set up correctly  there will be a definite firm spot
 They are designed to be more clearance on the full lock position
It would be work fitting bearing to is and see what it come up like
Nothing to loose
I things these boxes  gears are mofifeid tooth form  on 10 DP
I will PM you the contact info for a company that  should be able to reco the gears if they are not to pitted
BFit

anychevy:
After more research and (spouse) negotiation, I ordered a Borgeson kit today
http://www.borgeson.com/xcart/catalog/Corvette_P_S_Kit_19631966_SBC_SWP_with_factory_Manual_Steering-p-1524.html
John @ Pro steer was a pleasure to deal with.
http://www.allvet.com.au/
Will need a balancer (and maybe a water pump) pulley, but I think everything else is there.
I'll post up my install progress.
Cheers

Navigation

[0] Message Index

[*] Previous page