Author Topic: Brogsen power steering box  (Read 7060 times)

0 Members and 1 Guest are viewing this topic.

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Brogsen power steering box
« on: February 22, 2013, 10:21:49 AM »
I am looking for  feed back from any one who has fitted a Brogsen power steering Box
To a BB C3 with headers
I am concerned with clearance to headers
as  there is minimal clearance  ( about  7mm ) with original steering box
Bfit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline Reklaw

  • Four Barrel
  • ***
  • Posts: 189
Re: Brogsen power steering box
« Reply #1 on: February 22, 2013, 06:46:53 PM »
Hi Bob,

There's lots of stuff on the US Forums about this conversion. I was looking at some just today. Try this link out.

http://forums.corvetteforum.com/tags/borgeson.html

Bob
Bob Walker
Long Jetty

Offline 69 DIRTY RAT

  • Supercharged
  • ******
  • Posts: 1170
    • http://www.ratpackmuscle.com/
Re: Brogsen power steering box
« Reply #2 on: February 22, 2013, 09:54:27 PM »
I am looking for  feed back from any one who has fitted a Brogsen power steering Box
To a BB C3 with headers
I am concerned with clearance to headers
as  there is minimal clearance  ( about  7mm ) with original steering box
Bfit

Going by the CF pix I don't think it will fit in a BB?
http://ratpackmuscle.com/ SCARY TOUGH MUSCLECARS

69 540ci, 755HP 734FtLb RAT, 629rwhp

*I LUV MY '69 ZL-1 540ci VETTE, AND SO DOES YOUR GIRLFRIEND!                   

Offline bfit

  • Don't talk of dust and roses
  • Global Moderator
  • Supercharged
  • *****
  • Posts: 2878
  • Two one thousands
  • Location: NSW
  • Mood: Honey reinforced
  • Car: Yes
Re: Brogsen power steering box
« Reply #3 on: February 23, 2013, 07:08:37 AM »
Going by the CF pix I don't think it will fit in a BB?

I am coming to that same opinion
I have on ordered 
It may end up in by small block vehicle
BFit
I have seen too many instances where people continue to pursue wrong courses of action because they do not take the time to think critically about what has happened in the past.’’
Winston Churchill

Offline 68rat

  • Two Barrel
  • **
  • Posts: 46
  • Location: Tweed Coast
Re: Brogsen power steering box
« Reply #4 on: February 27, 2013, 11:05:39 AM »
Craigh has one in his SB well i think it was him
1968 L36
1969 454